Pay attention to the suitability of choosing ppe

[Global Science and Technology Comprehensive Report] According to the “Economic Times” of India on July 6, Siemens’ digital plant in Mumbai, India, was built and put into operation on the 5th. This is also the third digital factory opened by Siemens in addition to Germany and China. This facility can provide smart facilities to Indian SMEs.

Siemens hopes to use Mumbai's digital factories to demonstrate and sell a series of factory automation equipment and software to Indian manufacturing companies. Karlheinz Kaul, president of the company's Control Components and Systems Engineering Division, said: "We want to shorten the cycle and time to market. This data flow is achievable because digitalization is accelerating the entire process and improving the entire value chain."

Located in the outs******ts of Mumbai, this digital plant can produce more than 180 low-voltage switchgears. It can produce one unit every 9 seconds and the annual output can reach more than 5 million units. These machines are based on the Internet of Things technology. Sensors are installed on the fuselage and the resulting data is used to track records and improve their performance.

The digital factory is one of nine divisions of Siemens and aims to provide a comprehensive software and hardware product portfolio to integrate data from development, production and suppliers. Ashish Bhat, executive vice president of the company’s Indian digital plant, said: “India is a price-sensitive market, and without this flexible manufacturing, it cannot produce at the right market price. Small and medium-sized companies are rushing into aviation. Aerospace, automotive and other industries are indispensable parts of the supply chain and we need to address their needs."

Siemens' first two digital factories were built in Germany and China respectively. Kaul said: "India is an attractive market, and it is still growing. We need to help it win a place in the competitive environment, so (we) start investing here."

(Internship compilation: Zhang Qian reviewer: Liu Yang)

P3 Module Outdoor

LED Module Outdoor Full Color P3 Module Outdoor LED Display Module using the latest generation technology, 111111dots per square meter. P3 Module Outdoor Full Color has long span life time 10000hours. Picture true nature of Outdoor P3 LED Display Module is one good choice when compare Outdoor Full Color LED Display Module. We sincerely invite customers all over the world visit us for long term cooperation. 

1. First-class LED chip

2. With pure golden wire connection in LED.

3. Grand A row material for module frame and mask.

4. 4 layers PCB and copper plating thickness> 18mil.

5. Ag alloy solder paster to ensure good soldering on PCB.

6. Stainless steel screws when assembly.

7. Long-term Brightness capacity throughout product lifetime.

P3 Module Outdoor,Led Display Module Rgb,Outdoor Led Display Module,Outdoor Led Module

Shenzhen Jongsun Electronic Technology Co., Ltd. , https://www.jongsunled.com

In recent years, the development of the hardware tool industry in China is in good shape. There is a certain relationship with the stimulation of domestic consumption, and hardware cutters maintain the momentum of rapid growth.

In the first half of the year alone, the domestic tool market achieved a growth of 25 to 30. Despite the slowdown in the growth rate in the second half of the year, it still achieved an annual growth of 15%. In recent years, the international tool market has maintained a stable recovery, but conservative estimates of annual growth rates have remained at around 3 to 5.

In the tool making process, molds are needed for molding process, which is of great benefit to China's mold industry. The rapid development of hardware tools in China is inseparable from the strong market demand. In 2012, the total production volume of China-made knives reached 35 billion yuan, and export cutters reached 8.5 billion yuan, a year-on-year increase of 21.4. According to this growth rate, it is expected that the tool consumption will reach more than 48.5 billion in 2013.

With the stimulation of consumption, the scale of tool production in China is continuously expanding. With the promotion of the tool market, the market demand for tool dies in China will inevitably increase, which will promote the development of the domestic tool mold industry.

Atv Winch

Atv Winch,Small Electric Winch,Waterproof Atv Winch,Multifuctional Electric Winch

JINHUA RUNYE TECH. CO.,LTD , https://www.cnirunwinch.com

The mainstream wireless surveillance market now consists of wireless bridges, COFDM wireless video transmission equipment, and 4G transmission equipment. These types of equipment are used on different occasions and there is no absolute advantage or disadvantage. Lean Xiaobian gives you an analysis of the application of these three transmission methods.

First, the scope of application of wireless bridge
Wireless bridges are relatively cheap compared to the other two methods. In some fixed areas, such as factory areas, construction sites, river courses, forest fire prevention, and lakes, there are more points and fixed distances. With only one investment, installation and commissioning are simple, and subsequent expansion is easy. However, the wireless bridge must be within the visual range, that is, without obstacles.

The wireless network bridge of Lai'an has different equipments at different distances. The farthest point-to-point transmission under the visual environment can reach 100 kilometers.

Pet cotton series

Pet Cotton Series,Environment-Friendly Sound-Absorbing Cotton,Fireproof Sound-Absorbing Cotton,Noise Proof Sound-Absorbing Cotton

Yidebao Technology Development Co.,Ltd. , https://www.zgyidebao.com

                    About us

BOTOU HUIKEYUAN ENGINEERING CONTROL CO, . LTD
  is the "Important individually-run enterprise"of Botou City. For 20 years we have devoted ourselves to manufacture of metal-plate cold forming machines and now we have achieved unique management pattern and product development ability


Our advantage
   [] Excellent reputation for sound and innovatitive engineering
        The use of CAD CAM technology ensures the highest standard of forming precision
   [] Experienced technicians team
       Good at installing and debugging and ensure the machine run durably and smoothly
   [] Experience in exporting to oversea countries
       Engineers available to service machinery overseas
   [] 2 years warranty - double than general
       The warranty is effective for the whole production line with free replacements.


Technical Parameters

      1. Main Motor Power: 5.5KW
      2. Hydraulic Station Power: 4KW
      3. Hydraulic Oil Pump: CB-E310
     
      4. Sprocket: P-25.4
      5. Roller Station: 14
      6. Yield Strength: 12-32MPa

      7. Diameter of main shaft: 95mm
      8. Material of Roller: 45#steel hard chrome plating
      9. Material of Blade: Cr12mov

      10. Processing Speed: 8-12 mtrs/min
      11. Thickness: 0.2-2mm
      12. Installation Dimension (L*W*H): 7.5m*1.5m*1.4m
      13. Total Weight: 5.5T


Terms
1. Delivery: 30 days
2. Package: Seaworthy Packing
3. Payment: L/C, T/T
4. Validity: Please send an online enquiry for latest price


Remarks
1. The machine is designed acc. to your requirement
2. Within 2-year warranty if it goes broken new part will be sent freely as replacement


Manufacturing systems

Main markets

Best regards,
Mr.Jenrry Zhao
+86-1510-3275782

Fuel Pump Strainer

Fuel Pump Filter,Fuel Pump Strainer,Fuel Pump Strainer Filter,Universal Fuel Pump Strainer

Wenzhou Yunxin Auto Parts Co.,Ltd , https://www.diluosfilter.com

With the planning of projects such as “China of Peace” and “Smart City” and people’s increasing security awareness, the installation scale and radiation area of ​​video surveillance are increasing. The scope of the project involves the entire city and the camera reaches tens of thousands. One. Large-scale network monitoring has led to a large number of applications and popularization of PoE switches, and the use of PoE switches does bring a lot of convenience to the monitoring project.

Large Scent Diffuser

Scent Diffuser,Aroma Scent Diffuser,Fragrance Oil Diffuser,Electric Scent Diffuser

GUANGDONG GRASSE ENVIROMENTAL TECHNOLOGY CO.,LTD. , https://www.grassearomascent.com

Tableware disinfection cabinet should pay attention to the following points in daily use and maintenance:

1. The disinfection cabinet should be placed horizontally with no debris around it, and it should be dry and ventilated. It should not be less than 30CM away from the wall.

2. Sort the washed tableware and other items into the basket, and ask for vertical insertion to facilitate drainage and leave gaps to avoid stacking.

3. Do not open the door when it is not necessary during disinfection to avoid affecting the effect.

4. After disinfection, the cabinet is still at high temperature, easy to burn the skin, generally 10-20 minutes before opening the container to take things, if you do not use the tableware temporarily, it is best not to open the door, so that the disinfection effect can be maintained Days.

5. Consumers should not use the sterilizer as a safe. Because the disinfection cabinet is in a sealed state, if the disinfection of the tableware stored in the cabinet is not dried, the disinfection cabinet becomes a breeding ground for bacteria. Therefore, from the perspective of safety and health, disinfection cabinets should be opened once a day as well.

6. To clean and maintain the electronic sterilizer on a regular basis, remove the water from the water collecting box at the bottom of the cabinet. When cleaning, unplug the power plug and wipe the inside and outside surfaces of the disinfection cabinet with a damp cloth. Do not use a large amount of water to rinse the electronic disinfection cabinet. If it is too dirty, wipe it with a neutral detergent and wipe off the detergent with a damp cloth. Finally dry the cloth with a dry cloth. When cleaning, do not hit the quartz heating tube and ozone generator.

7. Regularly check whether the seal is sealed well to avoid heat loss or ozone escape, which will affect the disinfection effect. When used, if it is found that quartz does not generate heat or can't hear the ozone generator's high-pressure discharge “click” sound, it indicates that the disinfector has a fault and should stop using it, and immediately send it to the maintenance department for repair.

Umbilical Cord Clamp

Improve the survival rate of young animals, disposable umbilical cord clamps for pigs, cattle and sheep, which are practical, convenient and sanitary;

The interface is stable and not easy to loosen: the tail interface uses the internal buckle J-shaped embedding design, which has good stability;

Sawtooth to prevent falling: non-slip sawtooth at the mouth of the clamp to prevent detachment in the middle of the way and hurt piglets;

The polymer plastic material is durable and practical: the material will not affect the health of the pigs, it is convenient and hygienic, and it is practical once and not reused.

Umbilical Clamp,Umbilical Cord Clamp,Umbilical Cord Clip,Baby Umbilical Cord Clamp

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com

After years of development, the development level of China's cabinet hardware accessories industry has been greatly improved. The general cabinet hardware accessories can completely replace the entrance hardware accessories, but the functional accessories with high technical content have yet to be developed. In the future, the cabinet hardware industry will have a new transformation and upgrade. The cabinet hardware accessories industry should focus on the following two trends:

Collaborative development of new products

With the development of society, customers at home and abroad have put forward higher requirements for cabinet products, and the styles and requirements put forward by customers are most likely not equipped with matching cabinet hardware. In order to meet the requirements of customers, it is necessary for cabinet hardware companies to work together to intervene in the development of new cabinet products. Cabinet makers and hardware manufacturers work together to make full use of the design, technology and equipment advantages of both parties to form a new format. Cabinet hardware and new furniture are designed synchronously, synchronously, and jointly debugged to maximize social resources. Configuration.

Modern information technology also provides a platform for information exchange and technical coordination for the cooperative development of new cabinet hardware. The cooperative development not only meets the special needs of the cabinet companies, but also increases the variety of products for the cabinet hardware companies and promotes the product quality, so that the cabinet companies and hardware enterprises form a win-win situation. In the current social context, the cooperation between cabinet manufacturers and cabinet accessories companies is very important. Through collaborative development, mutual cooperation between design and development of the two sides becomes a kind of joint body, and complement each other, and they can face the market with stronger advantages.

Blend appearance and function

Cabinet hardware is divided into two categories: decorative hardware and functional hardware.

Many cabinet hardware makers invisibly separate the two, decorative hardware does not pay attention to functional development, and functional hardware does not have enough research on its decorative development. There is a disconnect between the two. Over the years, the functions and structures of cabinet hardware have been continuously improved, but they do not pay attention to their unity with decorative products. Although many products are very easy to use, they do not always look good. In recent years, with the advancement of the design level, many designers are paying attention to the cabinet hardware and review the cabinet hardware with the concept of industrial design, so that the appearance and functions of the cabinet hardware are better integrated into the cabinet hardware development. trend.

With the prosperity of the cabinet industry, the cabinet hardware industry will enter a more perfect new field. The development of new high-tech products is also particularly necessary to meet the growing demand for spiritual substances of consumers.

Residential Elevator

Residential Elevator,Residential Lift,Residential Building Lift,Private Residential Lift

IFE Elevators Co.,Ltd. , https://www.ifeelevator.nl

In the second half of the year, many people have accelerated the pace of renovating new homes. This has greatly stimulated the sales of home improvement hardware in China Science and Technology Hardware City.

Today, there are more and more young people after the 80s who have new houses. This part of the population is open-minded, and the selection of materials for decoration is eclectic. It is hoped that their own style will be different. In order to meet the market demand, many personalized decorative hardware products have been placed on the counter.

In the past, decorative hardware more emphasis on its mechanical properties, rust, moisture, life of moving parts. Today, decorative hardware is no longer suitable as a supporting role, ranging from door locks and door bumps to handles and hinges in cabinets, to towel racks in toilets, paper roll holders and coat hooks in living rooms. Different shapes, but still maintain the unity of artistic elements. In the hardware city market, it is not difficult to find a wide range of decorative hardware products that are elegant and fashionable.

Xie Mou, Nobel sanitary ware sales department introduced that in the face of an ever-changing market, some professional hardware manufacturers will keep up with the trend of the times and work hard at the design of products, rushing to launch new products, constantly changing the face of products, and diversification and serialization. The direction of development. Take the most common handles as an example, it has got rid of pure stainless steel, black, bronze, crystal clear and translucent, or dark, reserved, or elegant, these handles are full of expressive colors and become exquisite decoration. Hardware represents one of the products.

Shi Tao, owner of Botao Sanitary Ware Department, believes that the individual needs of consumers have prompted manufacturers to continue to develop products that are suitable for different levels of consumer preferences in order to win more consumers and win bigger markets.

LED ALR Lamp

Owing to our expertise and with the help of

our experienced professionals, we are offering our clients. Recessed Down

Light. This light is extensively used in high rising buildings across the

world. High in demand for its features like superior illumination, perfect

finish and durability, this light is available in a variety of colors, designs

and patterns. Designed in accordance with international standards using premium

quality raw materials, we offer this down light at very affordable rates to the

clients.

LED ALR Lamp, Bean Container Lamp, LED Single Head Bean Lamp, LED Double Head Bean Lamp, LED Triple Head Bean Lamp

Dearhe Optoelectronics Techco.Factory in Shenzhen,China , http://www.dearheledfactory.com

Eggs, commonly known as chicken and ginkgo, are the most commonly eaten eggs. Because of its comprehensive and rich nutritional content, it is called the "human ideal nutrition library." Nutritionists call it the "complete protein model."

The function and effect of eggs

1. Brain puzzle: Eggs play a major role in the nervous system and physical development, including choline can improve memory in all age groups.

2. Protect the Liver: Proteins in eggs have a repairing effect on liver tissue damage. Lecithin in egg yolk promotes regeneration of liver cells. It can also increase the amount of human plasma protein, enhance the body's metabolic function and immune function.

3. Prevention of atherosclerosis: U.S. nutritionists and medical workers used eggs to prevent atherosclerosis, and they were surprisingly effective. They extracted lecithin from eggs, walnuts, and pig livers and gave them to patients suffering from cardiovascular disease every day. ~ 6 tablespoons. After 3 months, the patient's serum cholesterol decreased significantly and achieved satisfactory results.

4. Cancer prevention: Based on the analysis of human cancer mortality worldwide, it has been found that cancer mortality is inversely proportional to selenium intake. Eggs are rich in selenium.

5. Anti-aging: One of the longevity experiences of many longevity elderly is to eat an egg every day.

6. Beauty and skin care: Eggs also contain abundant iron. Iron plays a role in hematopoiesis and transport of oxygen and nutrients in the blood. The ruddy beauty of human face is inseparable from iron. If iron deficiency can lead to iron deficiency anemia, the person's complexion becomes yellow and the skin loses its beauty. This shows that eggs are indeed one of the important foods to maintain the beauty of the skin.

3D Foldable FFP2 Respirator

3D Folding Face Mask,3D Folding Protective Mask,3D Foldable Ffp2 Respirator,3D Folding 5 Layer Disposable Respirator

Henan Aklly Filter Engineering Co., Ltd , https://www.akllyfilter.com

Metal sheet floor decking roll forming machine

Auto Parts Casting

Ningbo Yinzhou Leisheng Machinery Co.,Ltd , https://www.nblscasting.com