Pay attention to the suitability of choosing ppe Pay attention to the suitability of choosing ppe .

Pay attention to the suitability of choosing ppe

March 3 邯郸 Steel Market Price Quotes

The product name specification material steel factory/origin price (yuan/ton) is higher than yesterday last week than the previous month General line Φ6.5/8mm Q235 Handan Steel 4880 50 130 580 High Line Φ6.5/8mm Q235 Handan Steel 4930 50 130 580 High Line Φ6.5/8mm Q235 New Gold 4850 0 50 500 High Line Φ6.5mm Q235 Licheng Taihang 4870 0 180 350 Rebar Φ12mm HRB335 Handan Steel 5100 0 100 560 Rebar Φ12mm HRB335 Emerging Cast Pipe 5100 0 100 560 Rebar Φ16 -25mm HRB335 Handan steel 4900 0 100 560 Rebar Φ16-25mm HRB335 Emerging cast pipe 4900 0 100 560 Rebar Φ16-28mm HRB335 Licheng Taihang 4990 0 160 320 Plate screw Φ10mm HRB400 Licheng Taihang 4850 0 0 170 Hot rolled coil 1.8*1250*C Q235 Handan Steel 5900 0 400 540 Hot rolled coil 2.0*1500*C Q235 Handan Steel 5650 0 370 500 Hot rolled coil 2.5*1500*C Q235 Handan Steel 5460 0 440 560 Hot rolled coil 2.75* 1500*C Q235 Handan Iron & Steel 5400 0 460 650 Hot Rolled Plate Rolls 3.0*1500*C Q235 Handan Steel 5330 0 470 600 Hot rolled coils 4.0-4.75*1500*C Q235 Handan Steel 5240 0 -60 690 Hot rolled coil 5.0 -6.0*1500*C Q235 Handan Steel 5240 0 -60 690 Hot rolled coil 7.2-9.8*1500*C Q235 Handan Steel 5240 0 -60 690 Hot rolled coil 4.5-10.0*1500*C Q235 Tiantie 5260 0 - 60 7 50 Puzhong Plate 8.0mm Q235 Sky Steel, Handan Steel 6320 150 470 780 Puzhong Plate 10.0mm Q235 Sky Steel, Handan Iron and Steel 6120 150 470 790 Puzhong Plate 12.0mm Q235 Handan Steel 5890 130 440 750 Puzhong Board 14-25mm Q235 Handan Steel 5820 110 140 790 Puzhong Board 14-25mm Q235 Wenfeng 5750 120 350 840 Puzhong Board 14-25mm Q235 Puyang 5790 150 350 790 Puzhong Board 14-25mm Q235 Yuanbaoshan 5740 130 360 840 Low Alloy Board 8mm Q345 Handan Steel 6400 80 400 740 Angle Steel 50*5/6m Q235 Steel Anshan 5130 0 380 480 Angle Steel 63*6 Q235 Ansteel 5130 0 430 530 Angle Steel 9# Q235 Ansteel 5100 0 400 500 Channel Steel 8# Q235 Ansteel 5130 0 230 480 channel steel 12# Q235 steel 5100 0 350 600 channel steel 20#/8m Q235 Jiangtian 5200 0 300 600 I-beam 12# Q235 Haicheng 5200 0 500 850 I-beam 25b# Q235 Laiwu Steel 5100 0 200 450 I-beam Steel 32# Q235 Laiwu Steel 5100 0 200 450 Hot-rolled strip 3.5mm and above *735*C Q235 4900 0 0 470 Hot-rolled strip 5.5mm*685*C Q235 4900 0 0 470 Hot-rolled strip 3.0mm* (685-735)*C Q195 Vertical and horizontal 4930 0 0 470 Hot-rolled strip 3.5mm*(480-570)*C Q195 Wenfeng 4900 0 0 470 Hot-rolled strip 3.75mm*520*C Q235 Wenfeng 4900 0 0 470 hot rolled strip 3.0mm *(480-570)*C Q235 Wenfeng 4930 0 0 470

 

Jewellery box

Shell Jewellery Box,Snap Jewelry Box,Jewellery Box

Tengjun Shell Arts & Crafts Co., Ltd. , http://www.szpearlproducts.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۳:۰۹:۱۸ توسط:Aramasque موضوع:

Diana delicate embroidery underwear to meet the requirements of every detail of women

Today's women's product demand is undoubtedly more and more personalized, which naturally includes underwear , Diana conform to this trend, the product has been adjusted in time, underwear is more refined and noble, more variety and personality, and strive to meet women Every detail of the request.

戴安娜

Warm, beautiful red and gold thread embroidery flowers graphics, always highlight the luxurious, noble, elegant, a queen-like nobleness exudes from the inside out, the strong gather of course, is an essential function of underwear, but also the comfort Can not be forgotten

戴安娜精致刺绣内衣  满足女性每一个细节的要求

Deep, steady ocher color is unique, not competing with other colors, exudes exclusive proud temperament, exquisite and delicate embroidery process, enhance the luxurious quality sense, Bra design piercing exquisite curves without forgetting to bring women safety sense.

Children Socks

Children Strip Cotton Socks,Child Tube Cotton Sock,Children Socks

Xingcheng Knitted & Hardware Factory , http://www.sockssupplier.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۳:۰۷:۱۹ توسط:Aramasque موضوع:

Proportional Flange Ends Pressure Reducing Valve

                            Trademark: YI CHEN

                       

   

                            Specification: CE API ISO

                       

   

                            Origin: China

                       

   

                            HS Code: 8481804090

                       

 

                    YI CHEN Proportional flange ends Pressure Reducing Valve
Full copper Y43 (13) X proportional valve body, piston, import gland the export gland and O-rings, gaskets and other parts.The valve is a cross-sectional area of the pressure at both ends of the floating piston in the use of valve differential pressure state, thereby changing the influent and effluent to achieve the purpose of decompression.Y43 (13) X-proportional pressure reducing valve structure rigorous, innovative, smooth running, lightweight body, easy to install, stable decompression proportion, ie, less "dynamic pressure" minus "static pressure", materials, all-copper or stainless steel, for clean water and sea water, not afraid of fouling and corrosion.
I produced the Y43 (13) X-proportional pressure reducing valve, beautiful appearance, reliable quality, the proportion of accurate, smooth, both less dynamic pressure less static pressure.Proportional pressure reducing valve pressure generated by the different-sectional area of the body internal piston both ends of the power to change the valve pressure to achieve the purpose of decompression.Y43 X-proportional valve:2:1,3:1,4:1,3:2,5:2 and other special ratio of the pressure reducing valve can also be designed according to user.

FAQ
1.Q:What is your main market?
A:Our main market is North America, South America, Eastern Europe, Southeast Asia, Africa, Mid East, Eastern Asia, Western Europe.
2.Q:Are there products standard?
A:Our model is standard, if you have specific demand, pls tell us.
3.Q:Do you have interest to do our own design items?
A:Absolutely!It's our pleasure.

Our Services
1)Our advantage:

We are the manufacturer with almost 20 years experience on valves.Best price,quality and service, Also we can control the production status.Shanghai YI CHEN team with strong ability in designing and after sell service.Cooperation with Carrier has improved our quality to a new level.


2)Terms of payment:T/T, L/C, Western union.

3)Shipment:Average 20-25days after receiving deposit.

4)Delivery:Shanghai/Ningbo ,by sea or air.

5)Gurantee:One year since delivery.

6)Inspection:100% testing for all the valves.

7) All kinds of CERTIFICATE OF ORIGIN.


Welcome to choose SHANG HAI YI CHEN , we are always ready!

 

                           

Switchable Welding Magnets

Welding magnets with onoff  function and strong magnetic power for tacking or holding the workpiece as the clamps. The switchable welding magnets are ideal for quickly temporarily holding steel work pieces to position in many industrial applications for their powerful magnetic force.

Advantages: 

· Conveniently switchable operations

  Strong magnetic powers

Welding MagnetWelding Magnets

Switchable Welding Magnets,Customized Welding Magnet,Super Strong Magnet,Strong Welding Magnet

NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۳:۰۶:۰۰ توسط:Aramasque موضوع:

Analysis of Home Phone Alarms against Damage

With the development of science and technology, there are many video surveillance and intelligent anti-theft alarm electronic products on the market, which provide favorable conditions for security and rapid detection. Due to the wide selection of human pyroelectricity, microwaves, and door sensors as the detectors, the alarm trigger signal is obtained from the unique characteristics of the small changes in their physical quantities, but some blind spots or dead spots, as well as changes in the external environment, there are Some limitations of the physical properties of the detector will give the alarm hidden dangers of false positives or false negatives.

Telephone alarm installation and use

House stealing and robbery can happen in any period and in any country, both ancient and modern, and it not only seriously endangers people’s property and life safety, but also is a social security problem that is difficult to completely solve. Although agencies and enterprises and institutions can send people on duty to install video surveillance and alarm emergency devices, it will play a defensive role, but some cases of theft and robbery will still occur. For the general public, there is also a certain awareness of prevention. For example, early security nets and anti-theft windows have certain security effects on homes, but they expose many hidden dangers in actual use, affecting city appearance, hindering fire escape, providing thieves with favorable conditions for climbing and stealing neighbors, and rust falling and wounding. Civil disputes and so on.

In order to quickly open up the market quickly, manufacturers of alarms design bulky mounted detectors to facilitate installation by the user. This provides thieves with conditions to destroy targets or counter-alarm operations, leaving a gap between The space for committing crimes seems to be guarded. It is virtually empty. Therefore, we must not only summarize the current problems in the security alarm market, but also study the social structure of people in highly advanced economic and technological periods. When the Gini coefficient of the gap between rich and poor exceeds the internationally recognized safety line, due to the psychology of some people Imbalance, the increase of the floating population, along with the excuse forced by life, some people treat the theft and robbery as a candid profession, and return to the old business after they are released from prison - gang partners and commit crimes frequently. In people’s normal lives, although the number of thieves who steal or rob are very small, the number of people who are robbed and robbed is also a minority, but the resulting consequences have caused serious harm to society. Therefore, precautions should be taken to attach importance to the installation and use of surveillance and security telephone alarms.

At present, wireless smart alarms sold at the national and secondary markets have high performance, wide monitoring, and high intelligence, but they have high prices and are exposed. They not only have poor anti-alarm and anti-destructive capabilities, but also have operations. Cumbersome and inconvenient. Many wireless smart alarms belong to fixed transmission and reception frequencies, fixed size, and fixed operating modes. In view of the above situation, in conjunction with the problems that have arisen in the actual use of the author for several years, here are some of the superficial views of individuals:

1, after the decoration of the house, gives people a feeling of comfort and beauty, make people feel comfortable living. If you decorate a beautifully decorated door and window, an anti-theft anti-theft launcher with a non-modern decoration will definitely affect the decorative effect of the entire house. At the same time, anti-theft transmitters mounted on doors and windows may be subject to human intervention or may be deterred from counter-alarm action.

2, belonging to high-frequency emission of electronic products, installed in the living room and bedroom, easily affected by the interference of large appliances magnetic field, thus affecting the alarm effect.

3. Some wireless smart alarms use human pyroelectric infrared or microwave sensors. They can set up dozens of defense zones and dozens of alarm calls. They have a high degree of intelligence and are networked with the community for system management. Although these products are highly intelligent, it is undeniable that their performance is flawed or even inadequate. Pyroelectric sensors may generate false alarms for the nearby high-heat, intense light and hot air currents. When the relative temperature of the environment is close to the human body temperature, missed reports may occur, and the glass and plates are less sensitive to moving human bodies. At the end of the last century, the Northern Song Dynasty cultural relics of the Kaifeng Museum were stolen and occurred in the monitoring range of human pyroelectric infrared burglar alarms. Microwave detectors use the Doppler frequency shift feature to monitor moving objects in the defense area. When someone enters the defense area, they will immediately report an alarm, but animals in the defense area and shaking plants may cause false alarms. Microwaves have a penetrating effect on walls and floors. If they are improperly installed, neighbors' activities may also cause false alarms. As long as any false alarm or false report of any smart alarm device will affect the credibility of consumers, it will reduce the sense of security.

4. It is relatively safe to use a door sensor as a detector. No missed report or false alarm can occur because its alarm signal is generated after the doors and windows are pushed by the external force of the crime. No committing action will not generate an alarm trigger signal, but it has a large volume and is a surface-mounted device, and it is vulnerable to hidden damage or anti-alarm action. If acquaintances commit crimes, such things are more likely to happen.

5. The alarm device with double-detection function is now on the market, and the human pyroelectric infrared detection and microwave detection are in the same group of detectors. The use of microwaves is not blocked and the performance of smoke, light, and temperature change is insensitive. This supplements the inadequacy of human pyroelectric infrared detectors, and basically eliminates false alarms through the composite detection of both units. However, this may be missed, because the human body's infrared radiation is easily blocked by walls, furniture, plates, glass, and so on. Shuangjian detector can trigger an alarm only if both units detect the invading human body at the same time. If a rogue with anti-alarm experience is encountered, it enters the zone under the cover of the glass and the plate, then the double-sense detection is difficult to trigger the alarm only with the single-sense function. Under the effect of the anti-alarm, will it not be “with the police not reporting”?

6, because the current video surveillance and security alarm electronic product detectors are almost all body-mounted equipment, in the installation process and form is not only unavoidable to the perpetrators provide damage to the target, but also to the thieves to create anti-alarm conditions . When the manufacturer researches and develops intelligent products without any false alarms, it may think that the detectors are in the room. If the damage is not successful, they will be recorded or triggered, ignoring the diversity of crimes. - Open space-time, step-by-step committing crimes, using science and technology devices to commit crimes, perforating magnets to commit crimes, committing anti-alarms, using blind corners to commit crimes, etc. In order to eliminate the blind spot that has never been involved in the security and alarm industry, the home phone alarm detector can only be reduced in size and completely concealed, leaving the perpetrators with a destructive goal and creating anti-alarm conditions.

7. Smart alarms have difficult operation problems. Among low- and middle-income people, young people with thin hands may not use it. Some middle-aged and elderly people with anti-theft and anti-robbery awareness, and some even the DVD remote control key functions and how to program are not clear, the smart anti-theft alarm code recording, programming, fortification, disarming and after the occurrence of alarm quickly Dealing with, may only look "instrument" sigh!

The blind spots and dead ends described in this article are only problems with home-telephone alarms. They do not involve crowded places, common areas and shared parts of owners. Highly intelligent large security alarm products are applicable to the public space and common parts of personnel offices, enterprises, and residential communities with property services. From the cage of the video surveillance, we can understand the suspicious conditions in the deployment area. Not waiting for a crime can be used to warn the thief. If the accidental alarm triggered by some accidental interpersonal activities can also be quickly and accurately judged from the cage of the video surveillance, to avoid wasting public security resources. It is the most intuitive and effective security facility for shopping, working, and living crowds. It is also the most ideal first line of defense for residential communities.

Home phone alarms against vandalism
For home security, there are many high-rise buildings in the district. There are many households in the same unit. Each room is only adjacent to the floor or the adjacent room. The space outside the front and front windows is in daily life. Neighbors' activities will naturally cross and involve each other. It is not advisable to monitor or arm the door outside the front window. If major security products are rejected by the culprit, the security alarm installed in the home may cause civil disputes. In the development of property management service security personnel in our residential community for about 20 years, although the crackdown on the department and the civil air defense and technical defense measures have been increasing year by year, there are still omissions or inconsistencies in the technicalization and anti-prevention of committing crimes. With regard to practical problems, cases of burglary and burglary in the country each year are still on the rise. No one dares to guarantee that in the future he will never experience an accident that has been stolen or robbed. Family anti-theft, anti-robberies and enterprises and institutions, supermarkets or residential communities around the prevention conditions vary greatly, the latter have on duty personnel, can be monitored from the cage - surface, perimeter patrols to determine false positives, handle the police situation; the former use the alarm The device is deployed and unattended at home. If a missed report occurs, the thieves commit the crime. If a false alarm occurs, it is very difficult for the owner to identify the true alarm in the home and rush into the guard, security guard or 110, which may be interpreted as history. The farce of the bonfire opera princes has really occurred afterwards. Help the guards, the security guards or the neighbors to fail. After the thieves enter the unit, community or village, the ultimate goal of the crime is a single family or individual. The security telephone alarm at home is also fortified under unattended conditions. It is not only necessary, but also ensures that there are no false positives. Anti-anti-alarm and vandal-proof functions can only be set within the scope of the home. Otherwise, it will cause false alarms or troubles caused by the activities of the owners of the common parts.

After more than two decades of development, the security alarm industry in China, especially after 2000, has a high degree of intelligence and involves a wide range of products. Not only are there many mature technologies and stable brands, but also products that guarantee zero false positives, These major security products contribute a lot to the public safety in various fields of the country. However, the security products have been expanding their market share to home burglar alarms for the past 10 years. The biggest difference between public security and home security is that there are unattended problems. The detectors and triggers of the large security model production are exposed. In an unattended home burglar alarm, the anti-alert case was given to indicate the target of destruction. Thieves can enter the windows, doors or rooms with telephone alarms to commit crimes. Some police officers do not report. The vast majority are not caused by missing reports. Instead, the thieves use anti-alarm measures to commit crimes.

Using door magnets as the door and window of the telephone alarm trigger, the intruder can easily make a hole in the glass or wooden door in a short time, and then push the door and window open, the trigger circuit still maintains the original state of defense, and the telephone alarm can not be triggered. The police situation. With the human body pyroelectric infrared detector fortified room, thieves can use glass, plates and other objects to block the body's infrared radiation, enter the defense area to complete the anti-alarm crime. With the development of science and technology, crime is also intelligent and complicated. When the dual-purpose function, glass crushing, displacement, vibration, etc. are used as alarm detectors, the limitations of its own physical performance can also directly or indirectly perform anti-alarm. The direct cause of the phone alarm not being able to accurately and quickly report the alarm is to install the detectors and triggers in the clear place, because they do not covertly send anti-alarms. Telephone alarms do not report alarms when committing crimes, which affects the credibility of home-telephone alarms. The manufacturer of the alarm did not take into account the hidden dangers of the installation of the home-telephone alarm indoor detectors. The security industry and related periodicals and magazines rarely discussed this issue. In addition to the dead zones and blind spots already mentioned above, the telephone alarms were also long-term. There are performance gaps that do not fit unattended. In the real home security, regardless of the city or the countryside, there are a few households that use the security phone alarm fortification. Most families still choose to have many hidden security nets and anti-theft guardrails. This is the reason why home telephone alarms are difficult to promote to most households. It is also a social and technical background to eliminate dead zones and dead ends, fill gaps, and develop and improve home phone alarms.

To solve the problem of home phone alarms against vandalism, anti-counterfeiting alarms and leak alarms, the circuit should be designed in accordance with the law on the concept of crimes, used as a trigger for the case's actions, without the need for cumbersome computer operations and the possibility of crash-free computer chips. The software does not use a cryptographic circuit that is easily deterrable by the perpetrator, does not use a magnetic card circuit that can easily be copied, does not use a remote control circuit that is susceptible to an anti-alarm, and does not use a detector whose physical performance is easily affected by environmental factors. The magnetic controller hardware is used as triggers and programmers that have been proven through decades of practical tests to prove that the service life is long, that the factory standards take more than 10,000 jumps, that there are no leakage errors, and that the volume is small and the physical properties are stable. The power supply and transmission lines are concealed, and the host and supporting devices are all installed in the concealed space or mezzanine reserved when decorating the house. It is necessary to ensure that the entire unit can be smoothly put in and removed. It is conducive to overhaul and there are no traces on the exterior. Alarm reference and destruction target.

The home telephone alarm designed according to the above ideas has been installed in my home for five years. During the five-year time course, it has been verified. There have been no missing reports and false positives. There was no home at any time for more than 40 days. The security device Being able to guard yourself, no trouble occurred. During the five-year period, some friends who had come to visit home had watched home security alarm demonstrations on many occasions, but so far they have not found any device that triggers a telephone alarm because the host and sensor detection components are all concealed. There are no traces of suspicion. Only the outdoor alarm lights flash when the phone alarm is seen. The indoor lamps and lanterns are bright, the megaphone shouts the alarm, the telephone calls the alarm, and the called party can not only listen to the phone after picking up the phone. Footsteps to the room and the sound of goods, but also from the auto-opening tape recorders to talk with the people who visit the show. If the theft occurs, the owner can use the radio to announce the thief to stop the crime, leave the scene, or call the guard to handle the alarm. If you are robbed into the room or upgraded to robbery after being detected by the owner, you can use the covert emergency button to call the guard or 110. The expansion of household appliances into joint alarms did not increase investment in security, nor would it increase the غير مجاز مي باشدt of decoration and decoration. It not only created shocking power for the perpetrators in many aspects, but also deepened the sense of panic and guilty conscience, making the security alarms more effective.

The primary issues of home security are theft prevention, looting, fire prevention, and gas leak prevention. As the terminal market for security and alarm commodities, it should be tens of thousands of households in urban and rural areas. These groups may account for 80% of the social structure and have a great market potential. Big. The manufacturers of the security and alarm industry should see the needs and barriers of thousands of households, improve the installation performance, eliminate the hidden dangers of home-telephone alarm detectors, and increase the credibility of people's security telephone alarms. R&D and production have stable physical properties and small volume. According to the characteristics of unattended home burglar alarms, they can conceal concealed detectors and triggers. The existing technical capabilities are not impossible but unexpected. Modern buildings are not past beam brackets or carved cages-dongs. There is no room for a gentleman to hide from the beam. They can only enter the reinforced concrete room through doors and windows to commit crimes. Home security, doors and windows is the key, if the alarm detector, trigger performance is stable, concealed concealed, in the absence of a set target, it is impossible to destroy or carry out anti-alarm crime. Changing the model-finished detection triggers into concealed devices will adversely affect the manufacturer’s product sales for a certain period of time. It is not that customers can buy them from the market and install them on their own. Professionals need special tools to complete this task. jobs. From the manufacturer to the customer, an intermediate professional installation link has been added. This link seems to be redundant, but it actually solves the problem of alarm detectors against vandalism and counter-alarm. Home phone alarm device can become the mainstream of home security in the future? Is there really a great market potential!

Some people may not agree with this view. For example, in the early years of the 80s of the last century, most people just needed the housing needed for their family life. They were dispensable for the decoration of the house at that time, and they reportedly took a disapproval attitude. The vast majority of people have developed to today, the vast majority The buyers must be able to decorate the house before they can stay. This is the demand of the times! With the increase in people’s material wealth and the rapid increase in the level of social civilization, people are more resentful and fearful of the thefts and robbery that seriously threaten the social harmony and stability. The new and old buyers and some homeowners who re-decorate their homes share the same mood. In the decoration of gorgeous and comfortable and happy families, the security awareness not only becomes a necessary requirement, but also changes in ideology. Amazingly, it is not only original and backward, but also hidden in a fenced-in anti-theft device requiring housing decoration. Synchronized with home security devices, concealed concealed installations are coordinated with house decoration and decoration, which not only saves غير مجاز مي باشدts, but also avoids the effect of house decoration due to the exposure of security components or components.

Ensure that the home phone alarms are protected from vandalism and anti-counter alarms, and that they can accurately report warnings when they are stolen. When emergencies occur, people are automatically sent out for help when they are not aware of the presence. With the pasغير مجاز مي باشدe of time, the reliability of telephone alarms has increased among thousands of households, and the original security nets and fences have been naturally eliminated. At that time, the demand of thousands of households is the market prospect of the security alarm industry.

Bucket Injection Mould

Bucket Injection Mould

Borgmould Factory , http://www.hycapmould.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۳:۰۳:۰۸ توسط:Aramasque موضوع:

China's deployment of research and development of carbon dioxide emission reduction technology

Focus on solving the problem of high energy consumption and high غير مجاز مي باشدt of the capture and storage process

In order to research and develop technologies that have China's independent intellectual property rights and غير مجاز مي باشدt-effective carbon dioxide (CO2) capture and storage, and promote CO2 emission reduction, the “Eleventh Five-Year” national science and technology support plan key project, CO2 capture and storage technology project, has begun to apply. The National “863” Plan Office of Resources, Environment and Technology issued a news report on February 28. The project will focus on the development of CO2 absorption, capture, adsorption, and storage technologies, focusing on the high energy consumption and high CO2 capture and storage. غير مجاز مي باشدt issue.
It is understood that CO2 absorption capture technology mainly studies two parts. The first is the development of a new type of highly efficient absorption solvent. This project will adopt a combination of molecular modeling, molecular design, and experimental research for CO2 emission sources in coal-fired power plants and other industries to develop high-performance, low-energy, and low-corrosive chemical, physical, and chemically coupled absorption solvents. The exploratory study of new technologies such as sulfur and carbon integrated removal and membrane-absorption coupling was conducted. The second is the absorption of extra large equipment and process optimization. Combining advanced experimental measurement techniques, computational fluid dynamics simulations, and experimental methods, the authors will study ways of strengthening large-scale separation equipment, develop tower components such as high-efficiency absorption tower packing, and develop simulation optimization techniques for CO2 absorption and separation processes to study energy-saving The new process of consumption, and then the formation of absorption technology to capture CO2 integrated technology solutions and development platform.
CO2 adsorption capture technology mainly develops new high-efficiency adsorption materials and optimizes the adsorption and separation process. This project will develop new adsorption and separation materials with high selectivity, high adsorption capacity, and low desorption energy consumption. The research on optimization technology of adsorption and separation process focuses on optimizing the design of the process flow of CO2 adsorption and separation process, establishing laboratory scale and intermediate experimental devices, researching and determining the low operating energy consumption process parameters, and establishing a technical platform optimized from adsorbent development to adsorption tower design. , Forming an integrated new technology for the capture of CO2 by adsorption.
CO2 storage technology focuses on the urgent need for greenhouse gas CO2 emission reduction, and studies the CO2 storage technology of terrestrial or submarine geological saline aquifers. This topic will aim at the latest trends in foreign development, research and development of CO2 storage technology with independent intellectual property rights, advanced and practical. Through key technological breakthroughs, low-غير مجاز مي باشدt CO2 storage technology suitable for China's geological conditions has been developed.

   

Gasoline High Pressure Washer

Gasoline High Pressure Washer,Gasoline Pressure Washer,Gasoline Engine Pressure Washer

Qingdao Main-Link Cleaning Equipment Co.,Ltd , http://www.qdspraygun.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۵۹:۴۶ توسط:Aramasque موضوع:

Invisible security network alarm failure solution analysis

Stealth security network, as the name suggests is used to prevent theft, but a few days ago, households with invisible security nets were thieves. Some citizens reported that the invisible anti-theft network installed in their homes was cut off by thieves. The thieves were able to divert their homes and steal their belongings, but they did not hear the alarm sounds at midnight. According to Ms. Tan of the Tri-Ring Decorations Co., Ltd., the invisible anti-theft net has the functions of protection, anti-theft, and aesthetics. Alarm failure may be related to rain erosion, improper connection, and lack of battery power.

Explore the city's protective function is more important than anti-theft function

In the three-ring decoration city, Taianju, Liyuan home these large building materials stores, found that sales of stealth anti-theft network is still small, there are two kinds of stealth anti-theft network sold, one is invisible anti-theft alarm without performance Network, also known as stealth protection net, the other is with alarm function.

The author saw the same type of invisible security net that he saw in the three-ring decoration city under the big word “invisible protection net” written in the Yarn Window Store of Tai’an. When asked about the difference between this and the invisible protective net, the clerk said that this stealth anti-theft net is not alarm function, generally used to prevent children, flower pots, clothes, etc. fall downstairs to ensure personal safety, anti-theft effect Not obvious. Ms. Tan of the Three-ring Decorative City good window decoration counter also said that in fact, the invisible security network security effect is not very strong, or called the invisible protection network is more suitable.

Three conditions can lead to alarm failure

According to Kang Xue of the Three-ring Decorative City Kangxue Door and Window, the invisible anti-theft net was cut without sounding an alarm, which may have caused the protective film to be eroded. Although the anti-theft net steel wire coated with a multilayer Oxford high temperature corrosion resistant protective film, but for a long time, the middle of the conductive copper wire may still be affected by the rain and failure, there is a wire rope was cut by the thieves and can not hear the alarm sound Case. At the same time, if the interface between the invisible anti-theft network and the alarm is improperly connected or the battery is dead, the alarm will not be able to alarm normally. Ms. Tan also said that invisible network security will be due to rain erosion, improper connection, battery power, etc. can not alarm.

غير مجاز مي باشدt of wire rope by thickness 70-230 yuan / square meter

It is understood that the stealth anti-theft nets currently on the market are generally used 304 profiles, 202 profiles easily rust, and now basically no need, 316 profiles used less. Ms. Tan introduced that the general judgment of the quality of steel wire ropes must first look at its diameter, the larger the diameter of the anti-theft performance is also better, followed by the wire rope is not even, there is no broken wire phenomenon. The wire rope and aluminum profile of the invisible anti-theft net are calculated together and are not priced separately. The bare metal (without alarm) غير مجاز مي باشدts vary depending on the thickness of the steel wire rope. The 2mm is generally between 70-100 yuan/m2. , 2.5mm about 100-130 yuan / square meter, 4mm need 180-230 yuan / square meter. If you install an alarm, you can add 50-100 yuan/piece.

Case: Stealth burglar has been cut by the thief but no alarm has been issued

According to netizens who broke the news on the banks of the West Lake, in June this year, an invisible security net was cut off at the Nanshan Mansion. The security net did not issue an alarm, and the thief continued to steal homes from the house. A mobile phone, laptop, and room were placed by the owner in the living room. The wallet was stolen. "Even if you cut off the normal alarm, the sound is very small. For people who are asleep or watching TV, they do not hear it at all. It seems that the hidden security net is not so safe," said another poster "lostkey". .

Small Classroom: What is Invisible Security Network?

According to Ms. Tan of the Three-ring Decorative City good window decoration counter, the invisible anti-theft network system consists of aluminum profiles and wire ropes. The wire rope consists of several or dozens of small steel wires wrapped in a conductive copper wire. It also needs to be installed inside the corner of the wall. Alarm. Invisible security nets generally use wire ropes with diameters ranging from 2mm to 4mm. Wire ropes can withstand tensile forces of 85-120KG or more, which can ensure that thieves cannot break. The standard distance between steel ropes is 5cm, and people cannot climb into the gap.

Abstract Bronze Sculpture/Statue

Bronze Sculptures,Bronze Statue,Statue Sculpture

Zhejiang Shengfa Sculpture Arts Project Co., Ltd. , http://www.zjmetalsculptures.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۵۷:۲۳ توسط:Aramasque موضوع:

Yuanqian fashion quality underwear with lace tell women tenderness

Every woman is like a natural explorer, her gaze traversing our souls, she always asks a question: what do we crave, and where does this craving come from? Today, Yuan Qian, she found the answer: desire to have and always maintain the perfect curve, and Yuan Qian underwear , to meet her longing.

媛倩时尚品质内衣  用蕾丝诉说女性的柔情万种

A classic fashion jacquard lace gathered bra, with the unexpected collision of the United States to your heart, 3D model cup design to ensure comfortable and breathable wear experience, just to let you enjoy the full interpretation of the gathered bra professional performance, super gather, On the three-dimensional support, side received fudges, stereotypes concentrated.

媛倩时尚品质内衣  用蕾丝诉说女性的柔情万种

For lace, women love the depth, such as intimate lover-like, gentle lace tells the tenderness of women, highlighting the feminine tenderness. Combination of ergonomic principles of three-dimensional cutting, beautiful, while there is a good gather support effect, lifting the chest tight to prevent the expansion and غير مجاز مي باشدging.

square scarf

Askimy Textile Co., Ltd. , http://www.nmgpashmina.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۵۵:۳۲ توسط:Aramasque موضوع:

Correct selection of valve electric device to prevent overload

The valve actuator is one of the devices used to operate the valve and connect it to the valve. The device is driven by electricity and its movement can be controlled by stroke, torque or axial thrust. Due to the operating characteristics and utilization of the valve electric device depends on the type of valve, the working specification of the device and the position of the valve on the pipeline or equipment. Therefore, it is crucial to master the correct selection of the valve electric device; taking into account the prevention of overload (the working torque is higher than the control torque) has become a crucial part.

The correct choice of valve electric device should be based on: 1. Operating torque: Operating torque is the most important parameter for selecting the valve electric device. The output torque of the electric device should be 1.2~1.5 times the maximum torque of the valve. 2. Operational thrust: The main structure of the valve electric device has two kinds. One is that the thrust plate is not configured. In this case, the torque is directly output. The other type is configured with a thrust plate. At this time, the output torque passes through the stem nut in the thrust plate. Convert to output thrust. 3. Rotation number of output shaft: The number of revolutions of the output shaft of the valve electric device is related to the nominal diameter of the valve, the pitch of the stem, and the number of threads. It is calculated according to M=H/ZS (where M is the electric device should satisfy The total number of turns; H is the opening height of the valve, mm; S is the thread pitch of the stem transmission thread, mm; Z is the number of threads of the stem.) 4. Stem diameter: For multi-turn type stem valves, electric valves cannot be assembled if the maximum stem diameter allowed by the motorized device cannot pass through the stem of the valve with which it is fitted. Therefore, the inner diameter of the hollow output shaft of the electric device must be greater than the outer diameter of the stem of the stem valve. For the partial rotary valve and the multi-rotary valve, although the stem diameter does not have to be taken into consideration, the diameter of the stem and the size of the key groove should be fully taken into account in the selection so that the assembly can work normally. 5. Output speed: The valve's opening and closing speed is quick, easy to produce water hammer phenomenon. Therefore, appropriate opening and closing speeds should be selected according to different conditions of use. 6. Installation and connection method: The installation method of the electric device includes vertical installation, horizontal installation, and floor installation; the connection mode is:

There is a thrust disk stem pass (Ming rod multi-turn valve)

The multi-turn non-thrust disk stem of the dark rod does not pass a part of the rotary electric device. It is an indispensable device for realizing valve program control, automatic control and remote control. It is mainly used in closed-circuit valves. However, the special requirements of valve actuators cannot be ignored—it must be possible to limit the torque or axial force. Usually the valve electric device uses a torque limiting coupling.

When the specifications of the electric device are determined, its control torque is also determined. When it is running for a predetermined period of time, the motor is generally not overloaded. However, overload can occur if:

1. The power supply voltage is low and the required torque cannot be obtained, causing the motor to stop rotating.

2. The torque limit mechanism is erroneously set so that it is larger than the stopped torque, causing continuous generation of excessive torque and stopping the motor.

3. When used intermittently as a jog, the heat generated accumulates and exceeds the allowable temperature rise of the motor.

4. For some reason, the torque limiting mechanism circuit malfunctions, causing excessive torque.

5. If the ambient temperature is too high, the heat capacity of the motor is relatively reduced.

The above are some of the reasons for the occurrence of overload. The motor overheating caused by these causes should be considered in advance and measures should be taken to prevent overheating.

In the past, the method of protecting the motor was the use of fuses, over-current relays, thermal relays, thermostats, etc. However, these methods also have their own advantages and disadvantages. For electric devices that are load-changing, absolute protection is not available. of. Therefore, a combination of methods must be adopted. However, due to the different load conditions of each electric device, it is difficult to propose a unified approach. But to summarize most of the situations, you can also find common ground.

The overload protection methods adopted can be classified into two types:

1. Determine the increase or decrease of the motor input current;

2. Judging on the heat of the motor itself.

The above two methods, regardless of the kind, must take into consideration the time margin given by the motor thermal capacity. It is difficult to make it consistent with the heat capacity characteristics of the motor in a single manner. Therefore, we should choose a method based on the cause of overloading--combination and compound method, in order to achieve a full-scale overload protection.

The motors of Rotork's electric devices are embedded in the windings with a thermostat with the same insulation level as the motor. When the rated temperature is reached, the motor control circuit will be cut off. The heat capacity of the thermostat itself is small, and its time-limited characteristics are determined by the heat capacity characteristics of the motor, so this is a viable method.

The basic method of overload protection is:

1. Thermal load protection for continuous operation or jog operation of the motor;

2. Protection against motor stall using thermal relay 3. Use fuses or overcurrent relays for short circuit accidents.

The correct choice of valve electric device and the prevention of overload are closely related. Should pay attention to.

tropedo level

Torpedo Spirit Level,High Quality Torpedo Level,Mini Magnet Spirit Level

Kacy Tools Co., Ltd. , http://www.jhspiritlevel.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۵۳:۴۴ توسط:Aramasque موضوع:

March 5 Dalian Steel Market Price Quotes

Product Name Specification Material Steel Factory/Origin Price (Yuan/Ton) Yesterday Last Week Last Month General Line Φ6.5mm Q235 Tong Steel 4940 0 120 510 High Line Φ6.5-10mm Q235 Tong Steel 4980 0 120 510 High Line Φ6 .5-10mm Q235 New Fushun Steel 4980 0 120 510 High Line Φ6.5-10mm Q235 West Steel 4980 0 120 510 High Line Φ8/10mm Q235 Beitai 4980 0 120 510 Rebar Φ12-14mm HRB335 Beitai 4970 0 100 560 Rebar Φ12-14mm HRB335 Xilin 4970 0 100 560 Rebar Φ16-25mm HRB335 Beitai 4860 0 100 620 Rebar Φ16-25mm HRB335 Tongsteel 4860 0 100 620 Rebar Φ16-25mm HRB335 Lingang Steel 4860 0 100 620 Rebar Φ16-25mm HRB335 New Fushun Steel 4860 0 100 620 Rebar Φ16-25mm HRB335 West Steel 4860 0 100 620 Rebar Φ28-32mm HRB335 Tong Steel 4940 0 100 570 Thread Steel Φ28-32mm HRB335 Ling Steel 4940 0 100 570 Thread Steel Φ28-32mm HRB335 New Fushun Steel 4940 0 100 570 Rebar Φ28-32mm HRB335 West Steel 4940 0 100 570 Rebar Φ8-10mm HRB400 New Fused Steel 5230 0 100 600 Rebar Φ12-14mm HRB400 Tong Steel 5130 0 100 550 Rebar Φ16-25mm HRB400 Pass Steel 5030 0 100 550 Hot rolled coil 2.0*1250*C Q235 Angang 5950 0 200 8 30 Hot rolled coil 2.3*1250*C Q235 Angang 5850 0 200 830 Hot rolled coil 2.75*1250*C Q235 Angang 5750 0 200 830 Hot rolled coil 3.0*1250*C Q235 Angang 5650 0 200 750 Hot rolled coil 4.0*1250* C Q235 Angang 5450 0 100 700 Hot rolled coil 4.75*1250*C Q235 Angang 5450 0 100 700 Hot rolled coil 5.5*1250*C Q235 Angang 5450 0 100 700 Cold rolled sheet 1.0*1000*2000mm Q195 Benxi Steel 6900 0 100 1200 Cold rolled steel plate 1.5*1250*2500mm Q195 Benxi steel 6800 0 100 1200 Cold rolled plate 2.0*1250*2500mm Q195 Angang 6800 0 100 1200 Cold rolled plate 3.0*1250*2500mm Q195 Angang 6900 0 100 1200 Medium plate 8mm Q235 Steel 6550 0 250 950 Puzhong Plate 8mm Q235 Jinan Steel 6550 0 250 950 Puzhong Plate 10mm Q235 Sky Steel 6250 0 200 870 Puzhong Plate 10mm Q235 Angang 6250 0 200 870 Puzhong Plate 14-20mm Q235 Jigang 6120 0 200 970 Medium plate 14-20mm Q235 Tanggang 6080 0 160 840 Low alloy plate 14-20mm Q345 Steel sleeve 6330 0 200 800 Galvanized coil 0.5mm*1000*C SGCC Hengtong 6700 0 0 550 Galvanized coil 1.5mm*1000*C SGCC Benxi Steel 6150 0 0 550 Galvanized coil 1.0mm*1000*C ST02Z Benxi Steel 6500 0 0 650 I Beam 12# Q235 Anshan Baode/ 0 0 0 I Beam 25# Q235 Haicheng East IV/ 0 0 0 Tank steel 16# Q235 Ah Cheng 5050 0 100 700 Channel 8# Q235 Tong Steel 5150 0 100 700 Angle Steel 40*4m Q235 Tong Steel 5150 0 100 700 Angle Steel 50*5mm Q235 Tong Steel 5100 0 100 700 Angle Steel 100*10mm Q235 Tong Steel 5150 0 100 750

 

Steel Pipe

Cold Rolled Strip Co., Ltd. , http://www.jypicklingplate.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۵۱:۴۹ توسط:Aramasque موضوع:

Use shut-off valve should pay attention to five issues

Emergency shut-off valves are new products that have been developed in recent years. Applications are increasing in the project. During the installation and debugging process, we also found some problems, some of which are construction problems, and some of which are design issues. A good product not only has a better quality of the product itself, but the most important thing is to let everyone understand it, become familiar with it, and use it reasonably, so that it can play its biggest role.

First, why use emergency shutdown valve
As we all know, the fire control network and the living pipe have traditionally been two water supply systems. The two pump units have separately supplied water, and the water from the second road has been supplied from the pump room to the building for a long distance. In this case, the construction of the second-line pipeline is heavy, the pipeline material is twice as many, and the identification of a certain pipeline during maintenance is also inconvenient. Second, fire-fighting pipelines do not use for many years, and they are prone to rust. Corrosion thinning, usually without pressure, and in the event of a fire, the sudden increase in pressure within the pipeline, prone to burst, resulting in the fire system can not supply water. Third, Shanghai promotes direct pumping of water from the municipal pipe network and no longer sets up underground water pools. This not only saves the غير مجاز مي باشدt of pool construction, but also avoids secondary pollution of water sources. Maintaining the cleanliness of water and ensuring the health of the people is the most important one. Because of these advantages, this product is gradually being welcomed by everyone.

Second, the emergency shut-off valve works

The emergency stop valve is one of the hydraulic control valves. It consists of main valves, throttle valves, pilot valves, pressure gauges, and take-overs and other fittings. When the inlet pressure of the main valve is lower than the pressure set by the pilot valve, the pilot valve is in the open state at this time, the pressure in the upper chamber of the main valve is equal to the outlet pressure of the main valve, there is a pressure difference between the inlet and the outlet, and water flows out of the outlet through the valve port. . When the fire pump starts, or when the pressure of the variable frequency pump rises and exceeds the set pressure of the pilot valve, the pressure of the control valve of the main valve inlet guide valve increases, the pressure acting on the spring increases, and the pressure is pressed downwards to drive the valve core. Move down, so that the pilot valve is closed, then the main valve inlet pressure continues to be added to the main valve bonnet cavity through the throttle valve, because the valve is under the downward pressure greater than the upward thrust, the main valve is closed. The key point to note is that the inlet pressure is less than the set pressure and the valve is always open. The inlet pressure is greater than the set pressure and the valve is closed. Many designers now mistakenly believe that as long as an emergency shut-off valve is installed, it will shut down. No matter what the conditions are, it will be wrong.

Third, the problems in the project
We encountered many unreasonable points in the actual installation and debugging process, and put forward for discussion. Located in a residential area on Yushan Road, Pudong, Shanghai. The residential pump room is located on the ground floor, three storeys with 12 storeys and 2 storeys, height of 2.8 meters, life pump fire pump is DN80, life pump lift is 53 meters, fire pump head is 60 meters, flow rate is 10L/S The water supply is divided into five routes and the DN80 pipe enters the roof tank. The water pump of DN80 is supplied by the DN80's water pump at the same time, so the water pressure is not high and it can only enter the water tank. The emergency shut-off valve sets the pressure at 0.5 MPa, and at the same time supplies the five-way water, the pressure will not exceed 0.5 MPa, and only the water tank will be filled with water. However, if there are four tanks full, the level control valve on the tank is closed, and only one tank is left unfilled and still needs to be replenished. At this time, the pressure will increase. If the pressure exceeds 0.5 MPa, the emergency shut-off valve will close. Under a water tank can not make up the water. In order to allow each tank to be replenished smoothly, it is necessary to stabilize the pressure at 0.45 MPa so that it is less than 0.5 MPa, and it will not cause closure. This requires a pressure relief valve on the life pump. Most units now have no pressure relief valve on the living pump. Some units use electrical contact pressure gauges, which automatically trip when the water pressure rises above 0.5 MPa, and the pumps stop running, which still cannot solve the problem of replenishing water in a single tank.

The second problem is that when the fire pump starts, all emergency shut-off valves are open. DN80 water pump is divided into five DN80 water pipes. At this time, if the water in the water tank is not full, the water pressure will not go up. It is impossible to exceed 0.5 MPa until the pool is filled and the liquid level control valve is closed. The pressure can rise. The designer here should consider increasing the pump capacity or reducing the diameter of the water pipe. The difference between the two should be at least a second gear. If the pump is changed to DN100 and the five-way water pipe is changed to DN65, the pressure at this time can exceed 0.5 MPa. In order to send fire water to the building. For another example, there is a residential district DN100 fire pump on the Jiangjiang Road in Shanghai, and the six-way water pipe DN80 still cannot be closed. Therefore, the pump and multi-channel water supply pipe should be different from the second gear.

The third problem is that in the drainage system of the pump house, the water discharged from the pressure relief valve should be discharged into the fire pool or sewer, and should not be placed in a narrow open ditch. Or take the example described above. During commissioning, the five-way water pipe is gradually shut down all the way. As a result, the water pumped out is completely discharged from the pressure relief valve in the basement. The drainage pump is far smaller than the fire pump, and the underground pumping station is flooded. . The best solution is to use variable frequency pumps for life pumps and fire fighting. The constant water pressure during commissioning is not affected by the flow rate. Alternatively, it is also possible to use a fixed displacement pump and a pressure relief valve. However, the pressure relief valve must be connected to a pool or sewer using a water hose. The sewer diameter is larger than the inlet pipe by one to two stops. It is better to turn off the valve directly after the user closes the valve. An anti-pollution cut-off valve should be added between the fire pipe network and the living pipe network to prevent fire water from flowing back to pollute domestic water.

The fourth problem is the choice of installation location. To date, most users have placed the emergency shut-off valve in the well. A user placed the emergency shut-off valve under the stairs. I think that it is reasonable under the stairs to facilitate the commissioning and maintenance. If there is enough maintenance space in the well, some wells will only have an area of ​​40×60cm2, and they will be more than 1 meter deep. The maintenance staff will not be able to debug the space. And there are no expansion joints or soft joints at both ends of the valve. If you need to remove and repair it, you cannot install it. It is recommended that the wellbore area is 60×80 cm2, and the depth should not be too deep. It is advisable to not touch the valve after capping the well lid. In addition, it is necessary to add a soft joint or valve with a connecting elbow.

The fifth problem is that the pipeline should be flushed before it is started. During the debugging process, we found that the emergency shut-off valve could not be closed. Excluding the pressure factor, there were suspected small stones remaining in the valve body. After inspection, most of the 12 valves had small stone deposits, and two of them had the lower chamber plug of the valve body. full. Therefore, the pipeline should be cleaned before installing the emergency shut-off valve to ensure that all valves work properly. - Sanjing Technical Department

Wood Paint

JiHengKang (JHK) Door Industry Co.,LTD , http://www.zjwoodendoors.com


برچسب: ،
ادامه مطلب
امتیاز:
 
بازدید:
+ نوشته شده: ۱۹ فروردين ۱۴۰۱ساعت: ۰۲:۴۹:۲۶ توسط:Aramasque موضوع:

خرید بک لینک behtarinbacklink.com -
سایت شرط بندی انفجار
بازی انفجار
سایت بازی انفجار
سایت enfejar
سایت جت بت
بهترین سایت پیش بینی فوتبال
سیب بت بدون فیلتر
بازی انفجار
سایت betball90
انفجار آنلاین
جت بت ۹۰
لانا کازینو
betorward
وان ایکس بت
آس ۹۰
جت بت
betforward
river poker
emperor poker
بکس بت
خرید چک سفید امضاء
بت تایم 90 وی آی پی
وان ایکس بت اصلی
ادرس بدون فیلتر وان ایکس بت
اپلیکیشن سیب بت
وان ایکس بت