Pay attention to the suitability of choosing ppe

Hisense Medical is supplementing China's creation of a short board in the field of medical equipment with high-precision, new technology and products that are independent and innovative.

Starting System

Starting System,Starting Air System,Engine Starting System,Stop And Start Engine System

Chongqing LDJM Engine Parts Center , https://www.ckcummins.com

chemical composition

Loquat fruit contains piperine, palmitic acid, teTCMLIBhydropiperic acid, undecyl-1-ene-3,4-methylenedioxybenzene (l-undecylenyl-3, 4-methylene-dioxybenzene), piperine, volatile oil, N-isobutyldeca-TCMLIBans-2-TCMLIBans-4-dienamide, sesamin ( Sesamin), pipernonaline, piperun-decalidine, piperlonguminine, di-hydropiperlonguminine , pipercide, guineensine, N-isobutyloc-tadeca-2(E), 4(E)-dienamide, N-isobutyleiغير مجاز مي باشدa-2(E),4(E)-dienamide,N-isobutyleiغير مجاز مي باشدa-2,4,8-tris N-isobutyleiغير مجاز مي باشدa-2(E),4(E),8(Z)-TCMLIBienamide,dehydropipernonaline,piplar-tin The seed contains sylvatine, diaeudesmin.

Anesthetic Laryngoscope

Anaesthetics Laryngoscope,Laryngoscopy Anesthesia,Portable Video Laryngoscope ,Beam Illuminated Laryngoscope

Jiangsu Yongle Medical Technology Co., Ltd. , https://www.jsylmedical.com

Parking management system is widely used in large and medium-sized cities, such as: scenic areas, office buildings, hotel underground parking lot, residential quarters, large and medium-sized shopping malls, entertainment venues, etc., but there are some differences in the field installation of different sites. To know what precautions are needed in the construction of the parking management system, the following details:

1. The AC power supply for the wiring of the parking lot system should be routed separately. It cannot be used in the same pipe as the signal line and the low-voltage DC power line. Because the parking lot management toll booths are generally installed with air-conditioning, Trident recommends that the AC power supply The size of the line should be sufficient.

Second, the signal cable of the parking lot system control main board can not be laid in parallel with the AC power line, and it should be avoided in a PVC pipe as much as possible. If it is limited by the environment, you must keep away from more than 50cm in parallel.

3. When the entrance to the parking lot is at a slope, the control cabinet should be installed on a flat road surface or on a concrete pouring platform. Dreidtech recommends avoiding the occurrence of half ramps when the vehicle is swiped.

4. During the wiring of the parking lot system, the distance between each equipment should be properly adjusted according to the site conditions. If there is no equipment in the system, the wire required for the equipment does not need to be laid, and the size and placement of the entrance and exit control machines, exit gates, and entrance and exit cameras are not required. The same position, the same size of the floor coil.

Fifth, parking lot wiring All external devices connected to the head can not be too long, so as to avoid exposure to short-circuit phenomenon, the parking lot system must be marked when the cable is marked, to facilitate the future installation, commissioning and maintenance.

6. Before the wiring in the parking lot, brush the hole of the pipe first. When passing the cable, grease or talcum powder should be applied. The cable that enters the nozzle should be kept straight, and measures such as moisture-proof and anti-corrosion should be taken.

VII. When wiring the parking lot system, avoid joints on the wires. Unless joints are available, their joints must be crimped or welded and waterproofed. Wire connections and branches should not be subjected to mechanical forces.

Oxygen Booster

Oxygen Booster,Oxygen Booster Compressors,Oxygen Boost Canister,Oxygen Booster Machine

Jiangsu Minnuo Machinery Manufacturing Co., Ltd. , https://www.chinaminnuo.com

With the rapid development of the sanitary industry, the industry management is getting better. The single, extensive production and management model is facing reform issues. The brand gap in the sanitary ware industry will also become larger and larger, and the development of the industry will be divided into two levels. The growth pattern of sanitary ware companies needs to be diversified.

Bathroom brand competition is fierce

At present, the homogenization of the sanitary ware market is serious, but the market size is continuously expanding. The limited market capacity is constantly being squeezed to a new high. For a long time, the development of China's sanitary ware industry mainly relied on expanding investment scale and increasing material input, and embarked on an economic development path that mainly depends on increasing the number of processing enterprises and increasing the number of sanitary ware dealers to expand the extension.

This extensive growth method continuously increases the pressure on the environment and resources and it is difficult to persist for a long time. Sanitary companies and products have low technological content and low economic efficiency. At the same time, the entire bathroom industry has long been at the bottom of the industrial chain, seriously affecting the economic competition in the industry. force.

The bathroom market pattern will shift from chaotic disorderly price wars to clearer brand competition. When the market develops to a certain level, the leading industry must be a large-scale enterprise with high degree of automation, large-scale customization, and standardized production. A few national strong brands will become market leaders. Cross-industry related brands will become new challengers in the market. A group of regional advantage brands will still be followers of the market, and more cutting-edge brands will act as The new generation of markets continues to emerge.

Bathroom growth model should be diversified

The transformation of China's sanitary ware industry to an intensive growth mode requires attention to expand the production of connotation, and is committed to excavating the internal potential of enterprises through the transformation of production technology of sanitary ware companies and the strengthening of sanitary ware enterprise management. Sanitary companies must change the practice of focusing on quantity and not paying attention to quality and efficiency. To expand the technological investment of enterprises to achieve the upgrading of sanitary products, quality is the key to success. At the same time, Sanitary companies must learn to change the traditional methods of industrial production, use information technology to drive business production, and take a new road to industrialization.

All kinds of signs show that the reform of China's sanitary ware industry is imminent. To realize the modernization of the enterprise, we must innovate the scientific and technological concepts of enterprises and improve the construction of the enterprise system. From a single extensive production and business model to diversified development.

Building Lighting Series

Modern lighting has gone beyond the simple lighting feature and into the light environment art filed,it is based on this design idea,the forth elements using the light of this space,will be "lighting"to"landscape beautification",make full use of various modern lightingart form and control technology,create a new night landscape.Our company's lighting products mainly include High efficiency LED Tunnel Lamp,Waterproof  LED Spot lamp,LED Grooved lamp,Hotel LED Wall Washer light,Square LED Point light source,LED Light dissolving lamp,Stainless steel LED Buried lamp,LED Contour light,LED Rail Guarding Lamp.

Building Lighting Series,Building Lighting,Building Lighting Control Systems,Building Lighting Design

Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulighting.com

                    A)Adopt shuttling printing mode which realizes one-roller-to-print-all size of the label.
B)The shaftless control system precisely controls the servo motor to make the machine work under its best status.
C)Unique inking design system reaches a super printing effect in which the streak trouble and ghost images are efficiently avoided.
D)Unique pressure regulating design enables no pressure re-regulation while doing plate cleaning or changing which solves the problem of color differences due to uneven pressure.
E)Patented Cassette type plate unloading design makes the unloading of the plate roller easy and fast ( 2-4 seconds).
F)Unique vacuum sucking type paper conveying system protects the paper from being damaged.
G)The machine designing makes it caters a wider range of the paper such as laminated, thermal or corona paper.
H)The machine can also be equipped with flexo, UV varnishing, back printing and roll to roll die-cutting stations which makes the machine caters a wider range of customer demands and enhance the competitiveness of the printer.

B Ag

غير مجاز مي باشدmetic Bag,Travel Bag,Tote Bag,Shopping Bag

qiangcheng Industry and trade Co.ltd , https://www.qiangchenbag.com

Low Speed Electric Car

Electric Car,Low Speed Electric Car,Hatchback Electric Car,Electric Hatchback Car

MAIN NEW ENERGY CO.,LTD , https://www.main-newenergy.com

Safety nets are generally classified into flat nets, vertical nets, and dense-mesh safety nets. Safety net manufacturers must obtain production licenses for producing safety nets, and must use safety nets to detect equipment when applying for production licenses. Different types of network, the need for safety net detection equipment is not the same, the following brief description:

Pingwang, Lien network production companies need the following safety net detection equipment:

A, ZW-732 safety-net impact testing machine

main technical indicators:

1, electric lifting, release impact, easy to operate and reliable.

2, with a protective net: a height of 1 meter.

3, with a large thickness of rubber cushion, can effectively reduce the damage of the impact, or the use of sand pit buffer way, effectively reduce the damage without impact. (optional)

4. The impact rack is equipped with safety protection devices to ensure the safety of operators.

5, impact ball: diameter 500mm, mass 100kg;

Or cylindrical sandbags: diameter 550mm, height 900mm, mass 120kg.

6, the impact height can be adjusted: the highest distance test surface 7 meters. The total height of the impact frame is 11 meters.

7, style 3 meters from the ground 8, in line with the standard GB5725-2009 "safety net"

Second, ZW-738 safety net tensile testing machine

Technical indicators:

1, models: two arms (LCD display)

2, the maximum test force: 50KN

3, measuring range: 2% - 100% of the maximum test force

4, accuracy level: 1 level 5, test force accuracy: better than ± 1% of the indication

6. Deformation display error: ≤±(50+0.15L)

7, test force: minimum resolution 0.01N

8, displacement measurement: resolution is 0.01mm

9, force accuracy: better than ± 1%

10, speed range: 1mm/min~~200mm/min

11, test stroke: 600mm (can be customized according to customer needs)

12, stretching space: 600mm (can be customized according to customer needs)

13, compression space: 600mm (can be customized according to customer needs)

14, test protection function: overload protection 15, safety protection device: limit switch 16, meet the standard GB5725-2009 "safety net"

Third, ZF-621 safety net flame tester (applicable to flame retardant)

1, the burner motor power consumption: 10W.

2, igniter timing: 0 ~ 99.99 seconds arbitrary settings (standard using 12 seconds).

3, continued burning time and flame retardant timer: 0 ~ 99.99 seconds, accuracy: ± 0.01 seconds.

4, flame height measurement device: ruler height 40mm.

5, the use of gas: propane or butane or liquefied petroleum gas.

6, in line with the standard GB5725-2009 "safety net"

The above are the testing equipment that Ping Net and Lien network must apply for when applying for a production license. The enterprises that produce dense-security nets, in addition to the above three types of testing equipment, also need to:

Fourth, ZW-732 safety net penetration test machine

Technical indicators:

1. Penetration: 50mm diameter, 5kg stainless steel (or 45#) round bar, 2 penetration angle between test rig and horizontal plane: 30°

3, 1 meter high safety net is safe and reliable.

4. Through test height: The distance is 1 meter through the center of the net. If the safety net manufacturer wants to check the performance of the production safety net, ZW-736 safety net ultraviolet pretreatment kit and ZW-737 will be used according to national standards. Safety net salt spray test box, please pay attention to our website for details.

This article is an article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint it, be sure to add the source of the description. Reproduce the misappropriation without permission.

Prepainted Guardrail

Prepainted Guardrail

 The sprayed plastic guardrail adopts heavy anti-corrosion treatment, the internal coating is hot-dip galvanized layer, and the surface coating is made of all-polyester powder coating, which is firmly integrated with the substrate by electrostatic spraying. It has a strong ability to absorb collision energy and

 has a good sight-inducing function.

Product Name	Prepainted Highway Guardrail
Material	Q235,Q345
Surface Treatment	hot dip galvanized,color coated
Zinc Coating	350g-1220g/square meter
Length	4320/4130mm
Width	2.5mm-4mm
wave height	81-85mm
wave width	310-315mm(W Beam) / 506mm(Thrie Beam
Standard	National Standard/American Standard/European standard
Capacity	100,000metric tons per year

Prepainted Guardrail,Prepainted Highway Guardrail,Prepainted Guardrail

Shandong Hengfeng Group , https://www.luhengfeng.com

China’s daily hardware industry has entered the world’s forefront. At present, at least 70% of China's hardware industry is a private enterprise, which is the main force for the development of China's hardware industry. China has gradually become a major metal processing country and exporter in the world, and it has become one of the world's major hardware manufacturers with a vast market and consumer potential.

In recent years, China has used nearly 1 billion U.S. dollars to import molds each year. Among them, precision, large-scale, complex, and long-life molds account for the majority. Therefore, from the perspective of reducing imports, the share of such high-grade molds and hardware tools in the market will gradually increase. . In the future, China's mold and CNC tool industry will also be among the best in the world. It is not difficult to find out carefully that the development of cutting tools for Chinese hardware tools generally has a tendency.

First look at the hand tool market: The demand for German hand tools has increased. In Germany, the tools for comfort and labor are the most popular. The smooth handles and beautiful appearance that help grip the tools are all important factors that appeal to their purchase. With regard to the types of tools, power tools are now becoming more and more popular. In addition, rechargeable tools have become increasingly popular. The new rechargeable tools currently on the market have multiple battery jacks that can be used in a variety of environments.

U.S. hand tool market demand has stabilized. At the same time that the United States increased the scale of new homes in the housing market at the end of last year, there are still a large number of existing homes unoccupied, bringing great opportunities for housing renovation. The average vehicle type and age of motor vehicles are getting larger, which has played a certain role in promoting the sales of hand tools in the automotive aftermarket. In addition, there is strong demand for forging tools for distribution of electronic products, especially adjustable wrenches. Taiwan's hand tools industry has certain advantages in the world by virtue of its stable product quality, timely delivery, and complete product range, which can meet customer needs. Moreover, Taiwan’s hand tool sales are dominated by the off-island market. At present, there are about 5,000 local manufacturers, which are mostly located in the central area of ​​Taiwan Island. According to the relevant information, with regard to the category of individual hand tools, the sleeves are the bulk of exports, followed by hand tools, the third is garden tools, the wrenches are ranked fourth, and the clamps are ranked fifth. In terms of exporting countries, the United States ranked first, followed by the United Kingdom, Germany and Japan.

In the new wave of world economic integration, the global manufacturing industry has accelerated its shift to mainland China, and China will gradually develop into a world-class manufacturing base. The obvious advantages of Guangdong, especially the Pearl River Delta region, will develop into a global mold production center within 10 years.

Flange Bolts & Collared Hex Bolts

we are specialized manufacturers from China,China Flange Bolts & Collared Hex Bolts Suppliers,we have the perfect after-sales service and technical support.Product categories of Flange Bolts & Collared Hex Bolts,wholesale high-quality products of Hex Tap Bolts R & D and manufacturing.

Hexagon Flange Bolt with Serration,DIN6291 Hex Flange Bolt with Convex, Stainless Steel Metric Flange Bolts

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrew.com

After many years of development, Ningxia Northwest Bearing has developed its imported domestic products bearing subway bearings that are being loaded by vehicles at a certain metro vehicle factory for no-load tests. The current operation status is good. Northwest Bearing had railroad truck bearings, petroleum machinery bearings, metallurgy mill bearings, construction machinery and heavy-duty automotive bearings and other major products, supporting the company through nearly 50 years of development.

In 2002, the northwest bearing bearing railway truck bearing was a joint venture with Germany's FAG. Due to losses for two consecutive years, the company transferred 49 shares to FAG. Northwest Bearing "lost" the main product of railway truck bearings, and after several years of hard work, petroleum machinery bearings, metallurgy mill bearings, construction machinery and heavy-duty automotive bearings were built as the company's leading products.

In 2011, Ningxia Baota Petrochemical Group Co., Ltd. became the controlling shareholder of the company, established the strong bearing industry as the main line, aimed at strategic emerging industries and major equipment manufacturing industries, seized the commanding heights of science and technology and the market, and built the company into the production of high-end bearings in China. The grand blueprint of the base and first-class brand companies.

In July 2012, the new product of the vertical mill supporting bearing used in the cement industry developed by Northwest Bearing was identified by the industry expert committee, and it realized the localization of imported bearings for vertical wear.

This year, Northwest Bearing obtained the qualification of pressure pipeline components and the scientific research and production license for weaponry and successfully passed the on-site review of GJB9001B-2009 military quality system certification. Northwest Bearing also aimed at the rail transit market and conducted tests several times. It is understood that after the northwest bearing metro bearing is successfully tested for no-load, it will carry out a heavy load test, which will lay a solid foundation for northwest bearing to open up the market and adjust the structure.

Fiberglass Pool LED Lighting

Fiberglass Pool Led Lighting,Underground Led Pool Lights,Waterproof Fiberglass Led Lights,Underground Swimming Pool Lights

Guangzhou Qshine Pool Lights Manufacture Co., Ltd , https://www.qshinepoollight.com

Standard Features:

Suitable for one color small size fast printing, widely apply in many
industries including stationery, toys, plastic, gift, electrical appliances, electronic, etc.
Microprocessor operation system, electro-pneumatic control;
125mm working stroke, ink cup design, more environmental;
Programmable up and down, forward and rear stroke;
Versatile X, Y printing pad adjustment;
Ink cup base with X, Y, R adjustment, worktable X,Y adjustment;
Heavy-duty construction with cabinet;
Stable, durable working and fine workmanship;
Foot pedal operation for single cycle;
Using Germany FESTO pneumatic components;
Installed safety guard and emergency stop button (optional);
Complying with CE safety standards;

ENGYPRINT Single Colour Inkcup Pad Printing Machine Specifications:

Fields of Pad Printer Application:
Pad printer is widely applied in many industries including toys, plastic, electronic, glass, metal, electrical appliances, ceramics, die-casting products, optical, sporting goods, stationery, etc.
For example, rulers, pens, golf balls, ping-pong, eyes of doll, cap of bottle, watches, cameras, ceramic, pharmaceutical and medical equipment, rackets, tapes, electronic components, IC, CPU, DRAM, keyboard, mouse, cell phone shell, decorative signs, etc.


Workshop diagram

Contact:

Glass Cooking Pot

Shangwey always focuses on healthy cooking. Borosilicate glass cooking pot is the representative.

Borosilicate Glass Cooking Pot,Heat Resistant Glass Cooking Pot,Transparent Glass Cooking Pot,Pyrex Glass Cooking Pot

Shangwey Cookware Co.,Ltd of Jiangmen City , https://www.shangwey.com