Pay attention to the suitability of choosing ppe

                    General

Hydraulic Proportional Electrically Controlled Porportional Valve(HTW-MV13) is driven by bi-directional motor. The floating /modulating thermostat will continuously collect the data and make processing, and send out control signals to operate or stop the motor so as to control the open/close angle of the valve.

FAQ

Galvalume Steel Coil

Galvalume Steel Coil,AZ 150 Galvalume Steel Coil,Galvalume Steel Coil with AFP

Hengji Steel Co., Ltd , http://www.tj-steelpipes.com

Standard oil mold temperature controller

(oil heater)

Feature:

*Anti-explosive device pipe

*Blowing return function (optional)

*Back to the oil temperature indicator

*Power automatic exhaust function of heating power switching

*Negative pressure system operation (optional)

*Heat the oil BY-PASS relief loop

*Instant cooling power function

*Multi-point temperature control unit can be customized

*Pump horsepower and heating power can be customized

*Electric with OMRON,FUJI,TE,LG,Schneider, Siemens

*Temperature control range: max.temperature 300ºC

*304 stainless steel pipeline to reduce the tube group and rust

*Isolated electrical control box, to extend the useful life of electrical appliances

*RS485 communication function, automated management (optional)

*Control: imported microcomputer or PLC control (optional)

*Perfect safety protection. fault display, repair and maintenance without professionals

Standard specifications,some special specifications can be customized

Working principle:

The oil temperature machine is based on oil as a medium of heat transfer of mold temperature machine. The oil temperature machine has an oil storage tank. It is an cycle that heat conduction oil from oil storage tank into the system at work by the circulation pump into the mold or other need to temperature control equipment. And then the heat conduction oil from the temperature control equipment will returns to the system again. When the temperature is lower than the set value, the heater began to work, when the temperature after reaching the set value, and stop working.  In the process, if the oil temperature is too high, the system will activate the solenoid value to let cooling water cool down the temperature directly until the water is down to the system requirement. If the temperature keeps increasing and reach to the set point of EGO, system will sound high pressure alarm and stop operation. if oil pressure falls down below the set point the system will send a signal of low level alarm and stop working.

Packing and shipping:

○ Packing
1. Dust Proof Film + Anti-collision Foam + 5 Layer Cartons + Ply-wooded Case (For LCL only, no need fumigation).
2. Customized packing is available.
3. We are always working hard on the most reliable packing in order to help you get the Perfect products.
○ Shipping

1. Express delivery

2. Air flight

3. Sea shipment

4. Railway transportation



Trade shows:
Plast Eurasia Turkey

Arab Plast, Dubai, UAE

Company information:

NANJING BUYING INDUSTRIAL EQUIPMENT CO.,LTD is specialized in R&D, manufacturing, sales and service for industrial plastic molding auxiliary equipment and industrial refrigeration equipment.

To meet the social development demands, BUYING is making every efforts to develop a new generation of products, which is power saving, environment protecting, safer and reliable. Not only the appearance is beautiful, but also it is economic and durable.

BUYING dedicated to improve industry working efficiency and product quality, to create much more profits for every customer, to reach a win-win result.

Our service:

For new and old import and export customer supply:

1.A professional sales team,experienced engineers, advanced manufacturing equipment,particular production technology;BUYING strictly implements ISO9001 Standard in all pretation;Pass SGS and CE quality guarantee system keep and assure customer products and delivery time.

2.Supply specialized installation guidance and after services that anytime and any country if customer need.

3.Reply your inquires within 24 hours anytime and anywhere.

Customer need is the most important;Customer benefit is our benefit;Our grow from company credit and working duty for our new and old customers.

Application:
The oil temperature machine is suitable for the auxiliary production engineering plastic material, plastic products. The oil temperature machine first preset to the temperature needed for injection mold, a lot of time for the high quality product, reduce the raw material test. Mold temperature machine accurately to reduce waste, the quality and production, is an indispensable tool in injection molding industry. It is mainly applied to heating up and temperature maintenance of mold. It also can be applied to other fields with the same demands. High temperature oil from the mould is returned to the cooler for indirect cooling. Then the oil will be sent to the mold after being pressurized by pump and heater pipe, which realizes heating and temperature maintenance of the oil. In addition it can ensure stable temperature control with the type of controller.



Certifications:



FAQ:

1. What makes you different with others?

1) Our Excellent Service
For a quick, no hassle quote just send email to us.

We promise to reply with a price within 24 hours - sometimes even within thehour.

2)Our quick manufacturing time
For Normal orders, we will promise to produce within 15-20 working days.

We can ensure the delivery time according to the formal contract

2. May I know the status of my order?

Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.

3.Can I use our own brand logo on the products?
Yes. We provide OEM/ODM service to our customers. Our professional engineershaving rich experience in heat pump design and manufacture.Just tell us yourideas or provide the drawing, we can help you to carry out your ideas.
4.What is your terms of delivery?
We accept FOB, CFR, CIF, EXW etc.You can choose the one which is the most convenient or غير مجاز مي باشدt effective for you.
5. What is your payment terms?
1) T/T 40% deposit, T/T balance 60% paid before shipment;

2) T/T 40% deposit, balance 60% paid through irrevocable L/C at sight;

3) Other payment terms are negotiable.
6. What about warranty?

One year, all spare and accessory parts of products will be free.

High Quality Automatic Mould Temperature Controller Heater Used for Laminator

Welcome to contact us for more details:
Lynn Lu
Tel: +86 025 5273 5099

Bushing Cover For Busbar

SINOFUJI Bushing Cover For Busbar Made of radiation cross-linked polyolefin material, it has excellent physical, chemical and electrical properties. The main function is electrical insulation of connectors, rust and corrosion protection of solder joints, mechanical protection, and reduction of phase spacing. It is widely used in electronics, communications, machinery, manufacturing and other fields.

Busbar Protective Cover,Electrical Protective Cover,Insulating Shroud For Busbar,Insulating Enhancement For Busbar

ShenZhen FUJI Electric Material Co., Ltd , https://www.sinofuji.com

The product name specification material steel factory/origin price (yuan/ton) is Φ6.5mm higher than yesterday last week than the previous month General line Φ6.5mm Q235 Handan Steel 4970 70 170 690 Common line Φ6.5mm Q235 Jiuquan 4970 70 170 690 High line Φ6.5mm Q235 Pinggang 5030 70 190 630 High Line Φ6.5-8mm Q235 Beitai 5030 70 190 640 High Line Φ6.5-8mm Q335 Haixin 5040 70 190 640 Rebar Φ12mm HRB335 Baosteel 5000 110 170 500 Rebar Φ14mm HRB335 Baosteel 4930 100 160 470 Rebar Φ16mm HRB335 Baosteel 4930 100 160 520 Rebar Φ18-25mm HRB335 Baosteel 4940 100 160 540 Rebar Φ12-14mm HRB335 Shanghai Bao 4890 100 140 490 Rebar Φ18-25mm HRB335 Shanghai Bao 4860 100 150 600 Rebar Φ16- 25mm HRB335 Tang Steel 4860 100 150 600 Rebar Φ16-25mm HRB335 2672 4870 100 150 600 Rebar Φ16-25mm HRB335 Handan 4880 100 150 600 Rebar Φ16-25mm HRB335 Laiwu Steel 4860 100 150 580 Rebar Φ20-25mm HRB335 North Taiwan 4860 100 150 600 Rebar Φ20-25mm HRB335 Yinfeng 4860 100 150 600 Grade III rebar Φ10mm HRB400 Baosteel 5320 100 160 540 Grade III rebar Φ12mm HRB400 Baosteel 5290 100 160 540 Grade III rebar Φ14mm HRB400 Steel 5290 100 160 540 Grade III rebar Φ16mm HRB400 Baosteel 5060 130 190 530 Grade III rebar Φ20mm HRB400 Baosteel 5060 130 190 530 Grade III rebar Φ12-14mm HRB400 Masteel 5150 110 170 400 Grade III rebar Φ16mm HRB400 Masteel 5060 110 190 590 Grade III Rebar Φ20mm HRB400 Ma Steel 5060 110 190 590 Grade III Rebar Φ25mm HRB400 Ma Steel 5060 80 170 530 Grade III Rebar Φ28-32mm HRB400 Ma Steel 5190 110 160 390 Hot Roll 1.5mm*1250*C ZJ330B Beaded Steel 6150 0 300 700 Hot rolled coil 1.5mm*1250*C SPHC 6100 0 300 700 Hot rolled coil 2.0mm*1250*C SPHC 5800 0 150 520 Hot rolled coil 2.0mm*1250*C SPHC A 5800 0 150 470 Hot Roll 2.75mm*1250*C SPHC Previous 5460 0 140 440 Hot Roll 2.75mm*1500*C Q235 Tang 5450 0 150 450 Hot Roll 3.0mm*1500*C Q235 Tang 5350 0 100 370 Hot rolled coil 3.0mm*1250*C Q235 Shagang 5350 0 100 370 Hot rolled coil 5.5*1500*C Q235 Saddle/Border/Don/Pack 5250 30 170 600 Hot rolled coil 7.5mm*1500*C Q235 Saddle/本/唐/包5250 50 170 610 Hot rolled coil 9.5mm*1500*C Q235 Saddle/Border/Don/Pack 5250 50 170 610 Hot rolled coil 11.5*1500*C Q235 Saddle/Bon/Tang/Pack 5250 50 1 70 610 Cold rolled coil 0.4mm*1000*C SPCC-SD Baosteel Yichang 7100 0 100 400 Cold rolled coil 0.5mm*1000*C SPCC-SD Baosteel Yichang 6950 0 100 450 Cold rolled coil 0.6mm*1000*C SPCC -SD Baosteel Yichang 6650 0 100 470 Cold rolled coil 1.0mm*1250*C SPCC Masteel 6430 30 330 730 Cold rolled coil 2.0mm*1250*C SPCC Masteel 6380 30 280 680 Cold rolled coil 1.0mm*1250*C SPCC Handan Steel 6380 30 330 730 Cold Roll Coil 1.0mm*1000*C SPCC Mei Steel 6350 50 350 750 Cold Roll Coil 1.0mm*1250*C SPCC Kunming Steel 6350 50 350 750 Cold Roll 1.2mm*1250*C SPCC Day Cold 6350 50 350 750 Cold rolled coil 1.0mm*1250*C ST14 Angang 6900 0 400 900 Cold rolled coil 1.0mm*1250*C DC04 Baosteel 7400 0 300 700 Cold rolled coil 1.0mm*1250*C SPCC Tangsteel 6380 30 330 730 Cold rolled coil 1.0mm*1250*C SPCC Handan Steel 6400 20 300 750 Cold rolled coil 1.0mm*1250*C SPCC Baotou Steel 6380 30 330 730 Product Name Specification Material Steel/Origin Price (Yuan/Ton) Than yesterday Week than last month Cold plate 1.0mm*1250*2500 DC01 Baosteel 7000 0 300 850 Cold plate 1.0mm*1250*2500 DC01/ST12 Wugang 6550 0 300 800 Cold plate 1.0mm*1250*2500 ST12 Angang 1780 6600 20 320 800 Cold Board 1.2mm*1250*2500 ST12 Angang 1780 6500 0 300 720 Cold Plate 1.5mm*1250*2500 DC01/ST12 Benxi Steel 6480 30 330 730 Cold Plate 1.5mm*1250*2500 DC01 Baosteel 7000 0 300 750 Cold Plate 1.5mm*1250*2500 SPCC Baosteel 6800 0 200 650 Cold Plate 1.5mm* 1250*2500 DC01/ST12 Wuhan Steel 6480 30 330 750 Cold Plate 1.5mm*1250*2500 ST12 Angang Steel 1780 6500 0 300 750 Hot Rolled Strip 2.5mm*183*C Q195L Jianlong 5000 0 170 410 Hot Rolled Strip 2.5mm* 204*C Q195L Jianlong 5000 0 170 410 Hot Rolled Strip 2.5mm*232*C Q195L Jianlong 5060 0 180 440 Hot Rolled Strip 2.5mm*160-204*C Q195-215 Tangshan Hongda 5060 0 180 440 Hot Rolled steel 2.75mm*232*C Q195-215 Tangshan Guofeng 5000 0 160 410 Hot rolled strip 5.5mm*685*C Q235 Beitai 5020 0 120 450 Hot rolled strip 5.6mm*700*C Q235 Beitai 5020 0 120 450 Hot Rolled Strip 5.75mm*685*C Q235 Beitai 5020 0 120 450 Hot Rolled Strip 6.0mm*690*C Q235 Beitai 5020 0 120 450 Hot Rolled Strip 6.0mm*700*C Q235 Beitai 5020 0 120 450 Hot Rolled Strip 5.5mm*685*C Q235 DeLong 5020 0 120 430 Hot Rolled Strip 9.5mm*735*C Q235 DeLong 5020 0 120 430 Hot Rolled Strip 1.8mm*355*C Q195-235 Tianjin Roll 5250 0 260 430 Hot Rolled Strip 1.8mm*292*C Q195-235 Tianjin Rolling 5250 0 2 60 430 Hot Rolled Strip 2.0mm*295*C Q195-235 Tianjin Roll 1 5220 0 270 420 Puzhong 6mm Q235 New Steel 6620 0 270 570 Puzhong 8mm Q235 New Steel 6300 0 350 720 Puzhong 10mm Q235 New Steel 6250 0 370 770 Puzhong Plate 12mm Q235 New Steel 5950 0 230 750 Puzhong Plate 14-20mm Q235 New Steel 5950 0 220 750 Puzhong Plate 8mm Q345 Yingkou 6380 0 400 800 Puzhong Plate 10mm Q345 Yingkou 6580 0 700 1100 Medium plate 14-20mm Q345 Yingkou 5980 0 250 800 Medium plate 10mm Q235 Ma steel 6180 0 350 750 Puzhong plate 14-20mm Q235 Masteel 5850 0 250 750 Puzhong plate 14-20mm Q235 Chunye 5720 0 420 760 low alloy Plate 6mm Q345 New Steel 6750 0 200 550 Low Alloy Plate 8mm Q345 New Steel 6450 0 370 800 Low Alloy Plate 10mm Q345 New Steel 6280 0 300 780 Low Alloy Plate 12mm Q345 New Steel 6180 0 330 830 Low Alloy Plate 14-20mm Q345 Yingkou 6150 0 320 850 Low Alloy Plate 14-20mm Q345 Ma Steel 6050 0 300 800 Boiler Medium Plate 8mm 16MnG New Steel 6600 0 100 400 Boiler Medium Plate 10mm 16MnG New Steel 6400 0 100 400 Boiler Medium Plate 12-20mm 16MnG New Steel 6150 0 100 400 Boiler Medium Plate 8mm 20G Pu Steel 6600 0 100 400 Boiler Medium Plate 10mm 20G Pu Steel 6400 0 200 600 Medium plate 12-20mm 20G Pugang 6150 0 100 400 Product name Specification Material Steel/Origin Price (Yuan/Ton) Yesterday Last week than last month Container last plate 8mm 16MnR Pu steel 6650 0 100 400 Container plate 10mm 16MnR Pu Steel 6450 0 100 400 Container Plate 12mm 16MnR Pu Steel 6200 0 100 400 Container Plate 16-20mm 16MnR Pu Steel 6200 0 100 400 Container Plate 16-20mm 16MnR Nan Steel 6250 0 120 420 Galvanized Roll 0.4mm*1000* CSGCC New Senior Middle School 6750 0 200 550 Galvanized Roll 0.5mm*1000*C SGCC New Senior Middle School 6550 0 280 650 Galvanized Roll 1.0mm*1000*C SGCC Newgrand 6230 0 330 680 Galvanized Roll 1.0mm*1000 *C ST02Z Bengang 6300 0 350 720 Galvanized coil 1.0mm*1000*C ST02Z Angang 6330 0 350 730 Galvanized coil 1.0mm*1250*C JY150 Wuhan Iron and Steel 6330 0 380 780 Galvanized coil 1.0mm*1250*C SGCC United Iron Steel 6270 0 320 690 Galvanized coil 1.0mm*1000*C SGCC Chinalco 6250 0 320 700 Color Coil 0.4mm*1000*C TST01 Baosteel 8700 0 450 700 Color Coil 0.5mm*1000*C TST01 Baosteel 8300 0 500 650 Color Coil 0.5mm*1200*C TST01 Baosteel 8300 0 500 650 Color Coil 0.6mm*1000*C TST01 Baosteel 8250 0 500 600 Color Coil 0.6mm*1200*C TST01 Baosteel 8250 0 500 600 Color Coil 0.42mm*1000*C CGCC New Middle School 7300 0 400 450 Color Coil 0.47mm*1000*C CGCC New Senior Middle School 7100 0 370 420 Color Coil 0.5mm*1200*C TST01 Ma Steel 7550 0 500 800 50 Steel Angle 50* 50*5 Q235 Masteel 5220 0 220 440 100*100*10 Q235 Masteel 5150 0 250 300 Channel 10 Q235 Masteel 5200 0 220 500 Channel 16#A Q235 Masteel 5120 0 240 540 Channel 20# A Q235 Masteel 5120 0 220 520 Channel 32#A Q235 Laiwu Steel 5200 0 400 570 I-beam 20#B Q235 Wugang 5000 0 280 600 I-beam 25#B Q235 Laiwu Steel 5250 0 520 670 I-beam 36# B Q235 Laiwu Steel 5300 0 550 700 I-beam 40#B Q235 Laiwu Steel 5320 0 520 640 Galvanized Pipe 4*2.0 Q235 Jiangsu Guoqiang 7120 0 450 450 Galvanized Pipe 6*2.0 Q235 Jiangsu Guoqiang 7020 0 440 440 galvanized pipe 3 inch *3.25 Q235 Tangshan huarong 5600 0 -430 -430 galvanized pipe 4 inch *3.25 Q235 Tangshan huarong 5600 0 -400 -400 galvanized pipe 5 inch *3.25 Q235 tangshan huayan 6390 0 240 240 Galvanized pipe 6 inch * 4.5 Q235 Tianjin Sui 5430 0 -770 -770 Galvanized pipe 8 inch * 4.5 Q235 Tianjin Sui 6660 0 460 460

Other Seamless Steel Pipe

Steel Angle,Angle Steel,Angle Iron

Seamless Steel Pipe Co., Ltd. , http://www.cz-steelpipes.com

Sanitary Diaphragm Valve, Manual Diaphragm Valve, Stainless steel Diaphragm Valve, Pneumatic Diaphragm Valve, 3 Way Diaphragm Valve

Features

1. Electro and Mechanical Polishing
2. Sealing Material: PTFE, NBR, EPDM, FPM
3. Manufacture Standard: GB, DIN, ISO, SMS
4. Zero Leakage
5. Connection: Welding, Clamp
6. Tpye: Double-acting, Single-acting

Specifications

Manual Diaphragm Valve

1). Nominal Diameter: DN15-50

2). Pressure Range: 0-16bar

3). Medium Temp.: -10°C-150°C

4). Ambient Temp.: -10°C-60°C

5). Valve Body Material: Stainless Steel

6). Sealing Material: NBR, EPDM, FPM

7). Connection: Welding

Pneumatic Diaphragm Valve (Clamp)

1). Nominal Diameter: DN15-50

2). Pressure Range: 0-16bar

3). Medium Temp.: -10°C-+180°C

4). Ambient Temp.: -10°C-+60°C

5). Valve Body Material: Stainless Steel

6). Sealing Material: NBR, EPDM, FPM

7). Actuator Cover: PA

8). Operating Pressure: 3-8bar

8). Type: Single-acting, Double-acting

Pneumatic 3-Way Diaphragm Valve

1). Inside and outside of valve body can be sterilized under high temperature

2). Driving Way: Pneumatic, normally closed (1), normally open (2), double direction (3)

4) .Max. Working Pressure: 10bar (Diaphragm is EPR or FPM), 6bar (Diaphragm is PTFE for one-side use)

5). Operating Pressure: 4-6bar (1), 3-4bar (2 or 3)

6). Diaphragm Material: EPDM, FPM, PTFE

7). Valve Body Material: SS316

8). Connection: Welding, Clamp

9). Manufacture Standard: GB, DIN, ISO, SMS

Pneumatic Diaphragm Valve (Stainless Steel Head/Plastic Head)

1). Inside and outside of body can be sterilized at high temperature

2). Driving Way: Pneumatic

3). Max. Working Pressure: 10bar (Diaphragm is EPR or FPM)

4). Max. Working Temp.: 150°C

5). Diaphragm Material: EPR, FPM

6). Valve Body Material: Stainless Steel, 316L

7). Manufacture Standard: GB, DIN, ISO, SMS

Pneumatic PVC Diaphragm Valve

1). Nominal Diameter: DN15-50
2). Pressure Range: 0-16bar
3). Medium Temp.: - 10°C~+60°C
4). Ambient Temp.: - 10°C~+60°C
5). Valve Body Material: UPVC, CPVC
6). Sealing Material: NBR, EPDM, FPM
7). Actuator Material: PA
8). Operating Pressure: 3-8bar
9). Connection: Double Union
10). Type: Double-acting, Single-acting

Producs Show




Packing Show


Contact

Thanks for your visiting.

If you have any questions about our products or company, please do not hesitate to contact us.

Contact Person: Olivia

Galvalume steel sheet

Yason Packaging Co., Ltd. , http://www.zjغير مجاز مي باشدmetictube.com

We know that when we buy a TV, we need to consider the size of the living room, so we can decide how many TVs to buy. It is more appropriate for the average family's living room to choose 55-inch, and the range of products is also more abundant. The 60-inch TV that is suitable for a larger living room seems to lack some buying suggestions.

Pile Driver

Fence post driver size :600mm,750mm,800mm long  

60mm or 75mm outer diameter

pvc coated or hot dip galvanized

EPE wrapped then in cartons  

Manual post hammer for Star Picket,T post,Y fence post 

Pile Driver Also called Post driver 

Our factory mainly manufacture and export Y fence post,Post driver,post hammer,and other accessories for farm post,ect.

.  

Surface: hot-dip galvanized, Powder coated 

Post driver available: 

Light Duty Diameter (MM): 60mm; Length (MM): 600mm ;750mm; 800mm etc. 

Light Duty Diameter (MM): 75mm; Length (MM): 600mm ; 750mm; 800mm etc. 

Thickness: 3.0-4.0mm steel pipe 

Packing: EPE wrapped then in cartons 

Application: 

Reduce work injury with this Post driver/Pile driver that easily driver steel posts into solid ground.

Pile Driver,Pile Driving Machine,Fence Post Driver,Post Driver

BAODING JIMAOTONG IMPORT AND EXPORT CO., LTD  , https://www.chinagroundscrew.com

Medicinal value

Stem and leaf decoction has a local anesthetic effect, 12.5% ​​concentration for infiltration anesthesia, the effect is still good, only the local irritation is greater. There was no significant effect on blood pressure and respiration of anesthetized dogs.

A non-nitrogen-containing crystalline component (decomposition point 91-92°C) was obtained from the petroleum ether extract of this product, which has a significant relaxing effect on the isolated rat intestine and can be caused by histamine and strontium chloride. Smooth muscle spasm, but no effect on acetylcholine-induced smooth muscle spasm.

**********take extracts a glycoprotein that can be injected intraperitoneally with 10mg/kg or intraamniotic injection of 3mg/embryo to pregnant rabbits between the 12th and the 16th day of pregnancy to allow the pregnant rabbit to terminate the pregnancy.

an examination

Water must not exceed 15.0% (Appendix IXH 2).

Total ash must not exceed 12.0% (Appendix IXK).

Electric Motor

Single Phase Motor,Three Phase Motor,Other Electric Motor

Pump & Vacuum Equipment CO.,Ltd , http://www.nssubmersiblepumps.com

[China Instrument Network Instrument Industry] In order to successfully complete the adjustment of the ladder water price in Wucheng County, Shandong Province, and formulate a reasonable amount of step water, the Wucheng County Price Bureau carried out a questionnaire survey on urban residents' water consumption.

Eyes Makeup

Sanjin Plastic Industry Co., Ltd. , http://www.sdmakeuppackaging.com

The chemical industry has once again experienced a “year of deficit” and contrasted with China’s many years of maintaining trade surplus. The chemical industry has always been one of the industries with a large trade deficit.
In the past 30 years of reform and opening up, China's petroleum and chemical industries have made considerable progress. The oil and chemical import and export trade has also made remarkable achievements. The export product structure has transitioned from a single resource-intensive model to a comprehensive export product structure supplemented by resource-intensive and labor-intensive technologies. In 2007, China's chemical import and export trade totaled 319.79 billion U.S. dollars, a year-on-year increase of 25%, an increase of 4.3 percentage points over the same period of last year.
However, behind the rapid development, the deficit in the import and export trade of petroleum and chemicals in China still exists and continues to expand.
The deficit will only increase. The latest data provided by Feng Shiliang, deputy secretary-general of the China Petroleum and Chemical Industry Association, shows that in 2007 China's chemical import and export trade has achieved a substantial increase, in which the increase in export trade is greater than the increase in import trade. The most obvious is the amount of pesticides, with a total volume of 477,000 tons of exports, a year-on-year increase of 20.1%, and an export value of 1.35 billion US dollars, an increase of 30% year-on-year.
A significant feature of the chemical import and export trade last year was trade. Increased quality of growth. This is mainly reflected in the fact that the export volume of products has dropped drastically, exports have risen sharply, and exports of products with high technological content and high added value have grown rapidly. Statistics show that annual exports of inorganic chemicals only increased by 6.1% year-on-year, but exports increased by 26.5%; exports of organic chemicals increased by 26.7% year-on-year, while exports increased by 34.6%. %. The export volume of specialty chemicals with high technological content and high added value increased by a large margin of 153.2%, reaching US.794 billion, accounting for 13.63% of the total chemical export trade volume, and the proportion rose rapidly. The increase in import of synthetic resin slowed further, to 5.4%, while the export growth rate reached 33.3%.
At the same time, the export of some high-energy-consuming products was initially contained. In 2007, the export volume of soda ash in China was 1.706 million tons, a year-on-year decrease of 5.7%; the export volume of solid caustic soda was 447,300 tons, an increase of 6% year-on-year, an increase of approximately 32 percentage points from the previous year; liquid caustic soda exports The volume was 1.027 million tons, a year-on-year increase of 13%, a sharp drop of 53% from the previous year; exports of dyes, pigments, etc. increased by 7.6%, a decrease of 10.1% from the previous year.
Last year, China's chemical import and export trade still had many remarkable points. As a result, the DAP products that were imported into the country each year were exported to 1.971 million tons in 2007, a year-on-year increase of 150.8%.
However, the export performance of China's petrochemical industry was unprecedentedly good. In 2007, the foreign trade deficit still showed an expanding trend. In 2007, China's chemical import and export trade totaled 319.79 billion U.S. dollars, of which import trade volume was 218.01 billion U.S. dollars, up 20.9 percent year-on-year, and export trade volume was 101.78 billion U.S. dollars, up 34.9% year-on-year. The trade deficit in the chemical industry continued to expand, reaching US6.23 billion, an increase of 10.7% year-on-year.
In this regard, Feng Shiliang made some explanations.
The most direct and most important reason for the widening of the deficit is the increase in crude oil imports. In addition, the domestic production of some organic chemical products and the three major synthetic materials cannot meet the market demand, and they still need to be imported to make up for the shortfall. In 2007, the crude oil trade deficit in China was 78.03 billion U.S. dollars, accounting for 67.13% of the total industry trade deficit. In particular, oil prices in 2007 have been operating at a high level, and China’s imports of crude oil have reached new heights. This has caused the total trade deficit in China's petrochemical industry to expand.
In addition, the export of chemical products in China is still dominated by medium and low-grade products with low technological content and added value, and imports mainly consist of high-grade synthetic resins and synthetic fiber monomers. This is also one of the reasons for the chemical trade deficit.
From the perspective of economic globalization, China's long-term chemical trade deficit, but also because the chemical industry industry chain development is not balanced. Most of the major domestic product structures still remain in the general-purpose type and high energy consumption. The industry chain of the petroleum and chemical industries is prone to various uncertainties. Severe uneven distribution of crude oil resources and frequent fluctuations in oil prices also have a great impact on the upstream and downstream industries.
At the same time, activities in the international oil and chemical industries such as business exchange, sales, mergers and acquisitions, and divisions are frequent, and the result is an increase in the competitive advantage of foreign companies. In contrast, the competitiveness of Chinese chemical companies needs to be further improved.
The above reasons have caused the total trade deficit in China's petrochemical industry to continue to expand.
REACH Regulations Blocking Experts have cautioned that the REACH Regulation will have a major impact on China’s import and export of chemicals to Europe and related downstream products. In June 2007, due to the impact of the REACH regulations, the number of tire exports from Liaoning to the European Union dropped by as much as 44.49%. This is a corroboration. It is understood that the REACH Regulation will be formally implemented on June 1, 2008, and will start a six-month pre-registration involving chemical products and its downstream textile, light industry, electromechanical, pharmaceutical and other fields. It will become a potential influencing factor for China's oil and chemical industry trade deficit.
According to Yang Weicai, a specialist in the China Petroleum and Chemical Industry Association, according to the REACH Regulation, all chemical products that have been produced in the European Union or imported from the European Union more than 1 ton/year must be registered within 11 years after the commencement of the regulation. Products incorporated into this management system will not be able to be produced and sold within the EU. Once implemented, REACH regulations will involve more than 30,000 chemical products and 3 to 5 million applied chemicals. It can be said that all of our chemicals exported to the EU and chemical-related products will be affected more or less. Not only that. The European Union is an important source of petroleum and chemical products in China. In particular, some organic, inorganic, and synthetic chemical materials with high-tech and high added value are urgently needed in China. After the implementation of the REACH regulation, EU chemical producers or exporters may increase export prices. This will undoubtedly increase the غير مجاز مي باشدt of China's chemical import companies. After the increase in production غير مجاز مي باشدts, the profits of Chinese enterprises will be reduced, and the competitiveness of the products will also be weakened. Some small and medium-sized enterprises may even be closed down due to export obstruction. Therefore, after the implementation of the REACH Regulation, due to China's restrictions on the EU's chemical export trade, China's chemical trade deficit may further expand.
The core competitiveness is the key To improve the international competitiveness of China's chemical products and reduce the trade deficit, industry insiders suggest that they can start from the following aspects.
First, the development of deep-processing chemical products will reduce the export of resource-based products and primary chemical products. Domestically, we should vigorously develop emerging industries such as new types of coal chemical industry, biochemical industry, organic silicon, organic fluorine, and information chemicals, and promote the upgrading of the domestic petrochemical industry with emerging industries, so as to improve the quality and technological content of China's chemical exports as a whole. On this aspect, there have been good signs in 2007. It is understood that in 2007 the output value of new products across the industry increased by 50.7% over the previous year, and the contribution rate increased by 10.3% year-on-year.
Second, we should control the inadequacy of production capacity in certain industries in the industry. The example of yellow phosphorus products in previous years is a warning. In the past few years, the market for yellow phosphorus was promising, which led to the climax of the competition and expansion of Yunguichuan and Hubei. However, with the expansion of production capacity and the intensification of competition among enterprises, the price of yellow phosphorus has been declining all the way, causing the export price at that time to be only about half of that in the international market, causing great losses to the yellow phosphorus industry. In recent years, China's oil and chemical industry has seen rapid growth in fixed asset investment, with an annual growth rate of more than 30%, which is almost equivalent to recreating an oil and chemical industry every three years. The Central Economic Work Conference at the end of 2007 has clearly stated that it is necessary to turn “two defenses” (preventing economic growth from overheating to overheating and preventing price from structural uplift to marked inflation) as the focus of this year's economic work and for the first time in ten years. It is proposed to implement a tight monetary policy. Therefore, the industry should take this opportunity to plan in an orderly manner to further realize the healthy and sustainable development of the petroleum and chemical industry.
Third, in order to reduce the chemical trade deficit, in addition to making efforts in product quality and industrial investment, many export companies in the industry need to raise awareness and strengthen their own strength. Domestic companies should align themselves with international large-scale chemical companies, implement the “go global” strategy, strive for more overseas investment projects, and strive to nurture themselves into large companies with international competitiveness.
In addition, companies must establish a reasonable upstream and downstream integrated operating structure. The degree of perfection of such a structure has a very important impact on reducing غير مجاز مي باشدts, spreading risks, and improving profitability.
At the same time, in order to avoid REACH regulations affecting China's chemical trade deficit, many domestic chemical export companies should actively respond and attach great importance to pre-registration. According to reports, the China Petroleum and Chemical Industry Association is organizing EU and domestic experts to set up a REACH response agency in order to cope with the possible negative impact of the implementation of laws and regulations, and actively organize and assist domestic enterprises in pre-registration of petrochemical products to jointly cope with exports. risk.

Cold Drawn Seamless Steel Pipe

Cold Drawn Pipe,Precision Cs Seamless Pipe,Annealed Pipe

Xinpengyuan Metal Manufacturing Co., Ltd , http://www.lc-steelpipe.com

Serios Labs in Edmonton, Canada, has recently secured a million Series A round of financing. The investors include United Rentals and Brick and Mortar Ventures, the largest leasing companies in North America. The main task of Serios Labs is to use VR for the training of heavy mechanical equipment operations, ranging from construction to mining, operation and maintenance of factories. In addition to financing, the company also signed a .5 million worth of cooperation.

According to reports, Serios Labs and United Rentals have a long history of cooperation, and the two companies have collaborated to create the United Academy Premium Online Training, aimed at improving the safety of industrial production without losing efficiency.

Serios Labs won the UNIDO International Award for Progress in Innovation Technology earlier this year.

Mobile Diesel Generator

Trailer Diesel Generator,Portable Generator,Mobile Diesel Generator

Supermaly Generating Equipment Co., Ltd. , http://www.sdgenerating.com

tebby bear

Custom Stuffed Animals,Custom Plush Toys,Teddy Bear

Rbin Industry And Trade Co., Ltd. , http://www.shplushtoy.com