"Equipotential" lightning arrester to produce lightning protection mechanism
"Equipotential" arrester is different from traditional arrester and still produces lightning protection mechanism:
When the grounding is good, a low-resistance channel is formed, and a lightning current is discharged, both the conventional arrester and the “equipotential” arrester will satisfy the need for discharge first, and a channel for the lightning current to leak into the ground first is advocated. In this way, overvoltage and overcurrent will not flow into the device as much as possible. Make the device protected.
However, when the equipment system is not equipped with a grounding condition, that is, when there is no ground discharge, the conventional arrester will not work after the grounding path is obstructed, and only the lightning current flowing in the equipment will be damaged and the equipment will be damaged.
The design of the "equipotential" arrester has a distinctive mindset. Firstly, a mechanism for limiting the pressure and current limiting is set up on each path leading to the equipment, and the system is clamped on the arrester's various paths to form a horizontal and vertical all-round “isopotential” state, and excessive lightning current inflow is blocked. equipment. At the same time, it can provide a low-resistance channel to the grounding grid, so that when the grounding is good, it is given priority to discharge through the grid to reduce the impact of lightning current on the equipment and on the relevant lines. If there is no ground discharge or the ground net is changed to a straight high-impedance state and cannot be discharged, we will make other relatively low-resistance or low-voltage lines or metal bodies connected to the lightning arrester bypass circuit and the arrester. The location, that is to force the lightning current to pass through the path allowed by the arrester to the low impedance, low voltage port circuit, or part of the metal object with “equipotential” connection to form a lightning current path, allowing the lightning current to flow outside the device. In places or locations, they may leak part of a grounded network that is well grounded when they are routed elsewhere, or they may be consumed as heat when other metal bodies and resistors pass through.
Veneer dryer is one of the Plywood Production Line machines in woodworking field. Veneer dryers can dry the veneers after peeling machine directly . the efficiency and drying quality is much better than natural drying . the fuel of the Core Veneer Dryer machine can be waste wood , steam , heat conduction oil and other heating medium. among them , the waste wood is the most economic one . The waste wood after peeling machine can be used as fuel and not need drying . which can reduce the drying غير مجاز مي باشدt greatly for the user .
Veneer Dryer,Veneer Dryer Machine,Core Veneer Dryer Machine,Veneer Roller Dryer
Shandong Shine Machinery Co.,Ltd , https://www.woodmachine.nl
برچسب: ،