Pay attention to the suitability of choosing ppe

Faucet lead exceeding the standard of people's health is relatively large, after all, every day through the tap to the use of water, so the choice of furniture faucet to use should pay attention to, usually have to diligently some faucet clean replacement.

1, the correct choice of tap

The material of the faucet is very large, so you should pay attention to the selection. Generally speaking, copper, ceramics and other materials on the market are better. The probability of lead exceeding the standard is relatively small. However, when choosing, you must pay attention to the selection of quality guaranteed. Product, to view the metal detection report of the faucet.

2, regular replacement

Replace the faucet regularly. Nowadays, chlorine is used as a disinfectant in tap water, and residual chlorine compounds in water will exacerbate the precipitation of lead in taps. In general, copper alloy faucets have been used for more than five years, and the amount of lead precipitated has greatly increased. Therefore, it is recommended that the use of taps in residents' homes should not be too long.

3, clean the screen impurities

If a certain period of time is used, it is found that the amount of water produced is reduced, and even the phenomenon of water heater stalling may be caused by water and sand plugging on the screen. At this time, gently unscrew the screen cover at the outlet of the faucet to remove impurities. In general, cleaning impurities on the screen regularly, up to three months, is better for family health.

4, clean outer plating

To protect the faucet coating, wipe it with a wrung, soft cotton cloth. Do not wipe it directly with a wet towel to avoid leaving scale, and do not wipe it with a burr. To avoid letting the faucet run into acid-base liquids, spray a neutral cleaner on the soft cloth and gently wipe the faucet.

5, to prevent the aging of the coating

The gold-plated part of the gold-plated product is extremely easy to peel off and loses its luster. The protein can be used to maintain the gloss of the coating. The protein is beaten with an egg beater to a slightly bubbling state. Then the faucet is washed with warm water and wiped dry. Then, a little protein is added, and the coating is gently wiped on the gold plated portion to protect the coating luster.