CorelDRAW drawing goldfish feed three-dimensional packaging process (5)

Because the surface of the box is relatively small, we do not plan to add a goldfish pattern on it. Only use the "ellipse tool" to draw a few white bubbles on it as a decoration. Once done, these objects are also framed at the same time and then combined using the Arrange - Group command on the menu bar. As shown in Figure 20.

Now, the front, bottom, and side patterns that make up the box are all drawn. The next thing to do is to use the three-dimensional functionality that comes with the software to organically assemble the three combined objects. We first click on the front of the box and click on the "Window - Docker - Stereo" command on the menu bar to start the "stereo" docker. We first click on the "Edit" button in the lower left corner of the window's "stereo camera" option, then select the "small back end" in the "stereo type" option, the depth is set to 4, remember to click after completion "Apply" button, as shown in Figure 21.

Then switch to the "stereo-rotate" option and set a 3D rotation effect for this box. First click the "Edit" button, select the numerical three-dimensional rotation mode, the rotation value is set to "X = -20 Y = -14 Z = -2", click the "Apply" button after completion. As shown in Figure 22.

AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscare.com
برچسب: ،