Automatic insulation oil dielectric strength tester automatic measurement can automatically print out
Product alias:
Automatic dielectric oil dielectric strength tester is also called: Insulation oil tester, oil pressure tester, insulation oil pressure tester, oil dielectric strength tester, insulation oil dielectric strength tester, insulation oil resistance Automatic Pressure Tester, Full-automatic Insulation Oil Pressure Tester, Microcomputer Automatic Insulation Oil Tester, Automatic Oil Tester, Full-automatic Oil Tester, Portable Oil Pressure Resistance Tester Product Features:
Automatic Insulation Dielectric Dielectric Strength Tester Automatic measurement can be automatically finished print output 1, automatic measurement: automatic dielectric oil dielectric strength tester is set up, just press the test button to complete all the work (automatic stirring, Automatic standing, automatic boost, automatic step-down, automatic recording of breakdown voltage value, automatic calculation of average breakdown voltage value, automatic printing of measurement results). After the test, voice prompts.
2. The instrument is equipped with an automatic detection function. The regulator automatically returns to zero and enters the normal standby state.
3, according to user needs can change the number of tests, mixing time, standing time.
4, the instrument uses automatic magnetic vibrator mixing, eliminating the uneven oil and air bubbles.
5, using a miniature TPU-A panel printer, automatic Chinese print output.
Technical Parameters:
1, the working power: AC220V ± 10%, 50HZ ± 5%
2. Measurement range: AC0-80KV
3, limited current: 5mA
4, measurement accuracy: 3%
5, pressure regulator speed: 2KV/S±10%
6, scheduled settings:
Number of times: 1-9
Mixing time 0-1 minutes 39 seconds Resting time 0-10 minutes 39 seconds 7. Conditions of use:
Ambient temperature 0°C-35°C
Relative humidity ≤75%
8, power: 300VA
9, cup gap: 2.5mm (cup gauge diameter)
10, volume: 415 × 315 × 315mm3
11, weight: 28kg
Oxygen Sensor For USA Car include Buick automobile oxygen sensor, Ford automobile oxygen sensor, Chevrolet automobile oxygen sensor, Cadillac automobile oxygen sensor, Jeep Automobile oxygen sensor, Tesla automobile oxygen sensor, etc.
The oxygen sensor is an important sensor of the vehicle. It is used as a feedback control system for electronically controlling the fuel injection device. It is used to detect the oxygen concentration in the exhaust and the concentration and dilution of the air-fuel ratio, monitor the theoretical air-fuel ratio combustion in the engine, and send a feedback signal to the computer. It is used to control the vehicle exhaust emission, reduce the vehicle's environmental pollution Key parts to improve fuel combustion quality of automobile engine.
Once the oxygen sensor fails, the computer of the electronic fuel injection system will not be able to obtain the information of oxygen concentration in the exhaust pipe, so it will not be able to feedback control the air-fuel ratio, which will increase the engine fuel consumption and exhaust pollution, and the engine will have faults such as unstable idle speed, misfire, surge and so on.
Therefore, the fault must be eliminated or replaced in time. The oxygen sensors are installed on the engine exhaust pipe.
Oxygen Sensor For USA Car,Chevrolet Epica 1.8 Oxygen Sensor,Jeep Grand Cherokeec Oxygen Sensor,Wing Tiger Ck1.6T Front Oxygen Sensor
Ruian OKOOO Electronic Technology Co., LTD , https://www.ofilterensor.com
برچسب: ،