G550 Steel Sheet Deck Floor Cold Roll Forminig Machine
Model NO.: Deck Floor Roll Forming Machine
Type: Floor Deck Roll Forming Machine
Model Number: Wlfm 60-160-800
Material: Galvanized Steel,Aluzinc Steel
Roller Material: S45c ,45#Steel with Chrome Treatment
Thickness: 0.8-1.2mm
Yield Stress: G450 ~ G550
Max.Forming Speed: 12 M/Min
Main Motor Power: 22
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Technical Parameters
| Material Specification | Aluzinc steel and galvanized steel. |
| Thickness | WLFM51-326.5-980, 0.75 mm to 1.5mm; WLFM75-300-900, 0.75mm to 1.50mm. |
| Main Motor Power | 22kw (two sections of machine, each secton has one motor with 11kw). |
| Hydraulic Station Power | 7.5kw. |
| Feeding Width | 1000mm |
| Cover Width | 800mm |
| Steel Stress | G450 ~ G550. |
| Roll Forming Speed | 12 m/minute. |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Hydraulic Uncoiler | Max. capacity: 8'000kgs. |
| Coil Inner Diameter | 508mm. |
| Voltage | As per customer's request. |
| Numbers of Stations | 26 stations |
| Type of Cutting | Roll-formed and length-set profile cutting. |
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Standard Equipment of Machine
| 1) | Manual Uncoiler | 1 set |
| 2) | Infeed Guide | 1 set |
| 3) | Embossing Roller | 1 set |
| 4) | Roll Forming Station | 1 set |
| 5) | Post-cut Equipment | 1 set |
| 6) | Hydraulic Station | 1 set |
| 7) | PLC Control Console | 1 set |
| 8) | Product Support Table | 2 sets |
| 9) | Spare Parts | 1 box |
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
FAQ
- Q:Are you a manufacturer?
- A:Yes absolutely. Welcome a lot for your visiting to us.
-
Q:What's the delivery time?
A:Normaly will take 60days
-
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
-
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
-
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Classic Guitar is widely used for guitar beginners and professional guitar players. We have different quality guitars.
Plywood linden classic guitars, spruce guitars are for beginners.
Sapele and rosewood guitars are for professional guitar players.
Plywood linden guitars and spruce guitars are selling the most in all classic guitars, the demand is huge for schools and students.
This can be an entry level guitar for all distributors and dealers.
Advanced Classic Guitar
FINO MUSICAL INSTRUMENTS COMPANY LIMITED , https://www.finoguitar.com
برچسب: ،