Is there an engine oil burning accident? Is it oil quality?
After the car engine was burned and tiled, the driver’s claim to the oil manufacturer continued to occur. Many people believe that damage to the bearing bush is due to poor lubrication of the engine oil and poor oil quality, thus causing disputes and lawsuits between the user and the oil production plant. In fact, the causes of the burning of tile accidents are various. The causes and treatment measures are as follows:
Causes Corresponding measures
1) The amount of oil is too small, the burning oil is replenished with new oil, or the higher visغير مجاز مي باشدity oil is used
2) The visغير مجاز مي باشدity of the oil is too low to use a higher visغير مجاز مي باشدity oil
3) The lubricating oil is diluted by combustion and replaced with a higher visغير مجاز مي باشدity new oil.
4) Lubricant oil has changed to oil change period, use new oil
5) The fuel supply system is clogged and the oil supply system is checked and adjusted
6) Insufficient lubricity of lubrication oil
7) Lubricating oil pump malfunctions overhaul and adjust
8) System Oil Leakage Inspection
--- Technical Department of Daoma Oil Production Plant
Therefore, after a burning tile accident occurs, the driver should first consider whether he is properly considering the condition of his vehicle and the choice of oil. Otherwise, he simply ignores other key factors because of the quality of the oil. I am afraid that similar accidents will be repeated next time and cause greater losses.
If the driver questions engine oil quality, he can inspect from the same batch of new oil and waste engine oil. The inspection items and judgment methods can refer to the question “How do you check the oil quality to find the reason after the vehicle has a red light phenomenon?”.
Furniture Plywood,Furniture Standard Plywood ,Laminated Poplar Board
Taizhong Wood Co., Ltd. , http://www.sgtzwood.com
برچسب: ،