Pay attention to the suitability of choosing ppe

Faults Possible Problems Solutions SOLUTION

Platform cannot lift

• The ground selective switch is not in the correct position

• Platform overload

• Lift button operation error

• Panel connection wear

• The battery is dead

• Check the line voltage • Select switch to platform position

• Remove some weight

• Reset button

• Repair or replace the cable

• Recharge

• Repair or replace the circuit

Electric pump does not work

• Reset button does not work

• The battery is dead or damaged

• poor battery connection

• Check the power cord is tight

• Repair or replace the contactor

• Recharge or replace the battery

• Clean and fasten the plug end

Insufficient voltage

• Hydraulic pump does not work properly

• Part pressure needs to be calibrated

• Hydraulic oil leaks at wiring connections, pipes or components

• Hydraulic component failures • Repair or replace the pump

• Calibration (contact after-sales service)

• repair or replacement

• Replace parts (contact service provider)

Hydraulic pump noise

• Insufficient hydraulic oil

• The pipe or connector is damaged or loose • Make up with hydraulic fluid (do not overfill)

• Repair, tighten or replace

LED Panel Light

Square Led Panel Light,Led Panel Light,Round Led Panel Light

Lead Semiconductor Technology Co., Ltd. , http://www.czdownlight.com