Galvanized Floor Decking Roll Metal Forming Floor Tile Making Machine
Model NO.: RF-FD
Main Motor Power: 18.5kw
Hydraulic Cutting Power: 7.5kw
Steel Thickness: 0.7-1.2mm
Power Supply: 380V, 50Hz, 3 Phase
Roller Stands: 28
Forming Speed: 0-12m/Min
Roller Material: High-Grade 45# Steel
Warranty: 12 Months
Delivery Time: 50days After Deposit
Trademark: Suhang
Transport Package: Film and Steel
Specification: CE
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Galvanized Floor Decking Roll Metal Forming Floor Tile Making Machine
Specifications
1. High wave, high strongness, high atuomation
2. Passed by CE and ISO9001
3. Adopt PLC system
Steel Deck Floor Making Equipment
The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.
The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation, low غير مجاز مي باشدt.
Main technical parameters
|
|
UnitType |
RF-DF |
| Steel Thickness | mm | 0.7-1.2mm |
| Forming Speed | m/min |
0-12 |
| Roller stands | stand | 28 |
| Roller Material | high-grade 45# steel | |
| Shaft diameter |
Ф90 |
|
| Main Motor Power | Kw |
18.5kw |
| Hydraulic cutting Power | Kw | 7.5 |
| Hydraulic pressure | Mpa | 12 |
| Power Supply |
380V, 50HZ,3 phase |
|
| Tolerance | mm | 1.5 |
| Material of cutting | Cr12 | |
| Control system | PLC with touch screen |
Machine Components
Decoiler, Main forming machine, Forming cutter, Computer control system, Hydraulic station, out table
Working Flow
Uncoiling-Feeding&Leveling ---Roll forming-Cutting-Products collecting
Machine photo
Screw Tip,Triangle Screw Tip,Tip Of Screw,Interchangeable Head Screwdriver
Zhoushan Qunying Plastic Machinery Manufactory , https://www.qunying-screw.com
برچسب: ،