Metal Steel Floor Decking Roll Forming Machine
Trademark: KXD
Origin: China
HS Code: 84552200
Metal Steel Floor Decking Roll Forming Machine
PRODUCT INFORMATION
Brief introduction:
The roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower غير مجاز مي باشدt
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
| 1. Genaral | |
| Material: | Galvanized Coil, Aluminum |
| Material Thickness: | 0.3-0.5mm |
| Main roll forming machine Power: | 11 KW |
| Forming Speed: | 10-12m/min |
| Feeding width: | 229mm |
| Production line G/W: | 12.5T |
| Production line length: | about 38m |
| 2. Working Flowing | |
|
| |
| 3. Technical Parameter | |
| 3.1 Decoiler | |
| Decoiler Type | Manual |
| Loading capacity | 3Ton, Impassive to expanding |
| 3.2 Roll Forming system with feed panel unit | |
| Axis Diameter | 50 mm |
| Forming Roller station | 36+1 groups |
| Main Axis material | First grade 45# steel,heated and quenched |
| Roller material | First grade 45# steel, Hard Chrome Coated, 2um heated and quenched |
| Pillar size | 42*45mm |
| Forming Speed | 10-12 m/min |
| Drive Type | Gear box |
| Machine Frame stand | Welded structural steel, thickness 12mm |
| 3.3 Cutting Device | |
| Cutting type | Panasonic Servo tracking cutting |
| Cutting system power | 2.2KW |
| Cutting length tolerance | ±0.5mm |
| 3.4 PU Foaming Untit | |
| PU Raw material tanks | A+B China good brand |
| 3.5 Electrical System | |
| PLC system | Japan PANASONIC/DELTA |
| Length Controller | Japan PANASONIC |
| Operation | Touch Screen PANASONIC/DELTA |
| Inverter | Japan PANASONIC/DELTA |
| Voltage | 380V/50Hz/3P |
Walk-behind Double Drum Roller
It is used primarily for small-scale
compaction work, such as pavements, cycle paths, small roads and small parking
areas, and places that need compaction but are difficult to reach with a large
roller.
800kg hand roller compactor with hydraulic
controlled walking, hydraulic turning. Its compact design makes it perfect in
the jobs on curbs and sides and in confined areas.
FURD walk behind double drum roller
features:
-Adopts Danfoss hydraulic pump, infinitely
variable speed;
-Hydraulic control walking, two drums
equipped with two hydraulic motors
-Hydraulic turning, tandem road roller
turned by button control, easy to operate;
-Deadman control lever offers reversing
protection.
Walk-Behind Double Drum Roller,Manual Roller Compactor,Walk Behind Roller,Vibrating Roller
Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.vibratoryroller.nl
برچسب: ،