Pay attention to the suitability of choosing ppe

Although the installation of LCD splicing screen is a professional to do, but I believe that such a simple installation process will not fail you down, let everyone explain in detail the LCD splicing screen installation method and steps. Never blink, take a good look.

Do not talk nonsense, let's go directly to the topic!

LCD splicing screen installation steps:

The first step: to find a long vertical beam, the length of 1368.6mm, each vertical beam is engraved with 4 scratches, the height from bottom to top is: 123.2mm; 481.2mm; 807.5mm; 1165.5mm, engraved The mark is facing up.

The second step: find the crossbeam, the length is 1160.2mm, install the corner on the side of the beam with the pylon;

as the picture shows:

The third step: Assemble the beam and the vertical beam. From the bottom to the top, the lower edge of the profile is parallel to the scratches, and the height is 123.2mm. Four of them are installed in turn, corresponding to a height of 481.2mm, 807.5mm, and 1165.5mm, respectively.

as the picture shows:

The fourth step: install another column to find a vertical beam and 4 beams, install according to the above steps until the last column is completed as shown in the figure:

Step 5: Fix the wall-mounting bracket and use the bender (1) to secure the bracket to the wall as shown in the figure:

(1) Use this M5 screw and bracket to fix as shown:

Finally, use the expansion bolts to fix the bending piece (1) and the mounted bracket to the wall.

Step 6: Lock the hanger for the LCD splicing screen
as the picture shows:

The seventh part: The splicing screen of the rack will be installed and hanged on the wall bracket, that is, the entire installation is completed.

Di Edi Review: Some things do not understand, but do not want to understand; some things do not do, but do not want to do, after all, there is money willful! Emperor Ai Di has professional technical staff, is responsible for the installation of LCD splicing screen, customers It can be completely assured to let us finish the installation work. If you want to learn, we are also very willing to teach you, after all, the skills are more than the pressure.

Automatic Cellophane Wrapping Machine

This machine is widely applicable to the automatic film packaging (with gold tear tape) of various single boxed articles, such as the medicine, health products, foodstuff, daily غير مجاز مي باشدmetics, stationery articles, and audiovisual products.

Performance Characteristics:

1. No need to regulate the height of two work tops of the machine when the mould is replaced, no need to assemble or dismantle the material discharge chains and discharge hopper. Reduce the replacement time of the mould four hours to the present 30 minutes.

2. New-type double safeguard mechanisms are used, hence other spare parts will not be damaged when the machine runs out of step without the stop of the machine.

3. Original unilateral hand swing device to prevent from shaking the machine adversely, and the non-rotation of the handwheel during the running of the machine can secure the security of the operator.

4. New-type double-rotary film cutting cutter can ensure no need to mill the blade during many-year use of the machine, which overcomes the defect that the traditional stationary single-rotary film cutting cutter was easily worn.

Automatic Cellophane Wrapping Machine,Semi Automatic Cellophane Wrapping Machine,Manual Cellophane Wrapping Machine,Cigarette Cellophane Wrapping Machine

Ruian Science Machinery And Technology Co., Ltd. , https://www.science-pack.com

برچسب: ،